PHASTEK Single-Color HALO Headlight Kit (CCFL - OEM Style) :: 2013 Scion FR-S
|
|
PIAA H11 Extreme White Plus Twin Pack Halogen Bulbs #14211 :: 2013 Scion FR-S
|
|
Morimoto Retro-Quik HID Projector System with Hero Ballasts and Bulbs :: 2013 Scion FR-S
|
|
|
|
|
|
|
|
The Phastek Halo Kit adds bright halos to your headlights on your Scion FR-S. Grab more attention with this unique mod! Add a remote to help find your car at night or for that extra "wow factor".
|
The PIAA H11 Style Xtreme White Bulb provides intense white light at a 4105K rating to illuminate road hazards and street signs long before normal halogen bulbs, with a slight blue topcoat tint for enhanced curb appeal. Manufactured to SAE recommended specifications and DOT compliant standards, this bulb provides 110 watts of light for 55 watts of power (55=110 watt) and is made with a high-quality, heat-resistant tube.
|
Retrofitting has never been so easy! Designed to be a "bolt-on" upgrade for a limited variety of applications, the Morimoto Retro-Quik system uses laser cut brackets to adapt better internals in place of your stock halogen projectors.
|
|
|
|
Borla Unequal Length Header (UEL) #17284 :: 2013 Scion FR-S / Subaru BRZ
|
|
Borla 2.25" Cat Delete Mid Pipe #60541:: 2013 Scion FR-S / Subaru BRZ
|
|
Kartboy Short Throw Shifter (28.5% reduction) #KB-020-BRZ-Shifter :: 2013 Scion FR-S / Subaru BRZ
|
|
|
|
|
|
|
|
The header is designed without the restrictive primary catalytic converter and the incorporated proven flex-coupler design combats the vibration of the Boxer engine for increased longevity. Borla products are backed by a million-mile warranty, so this is the only header you will ever have to buy for your FR-S or BRZ.
|
The mid pipe weighs 6.7 lbs and features 2.25″ diameter piping. The combination of the increased diameter piping along with the removal of the catalytic converter results in an increase and power accompanied by a more aggressive exhaust note.
|
28.5% reduction in throws. 0.375" Knob Height Reduction. Includes Rear Shifter Bushings.
|
|
|
|
Kartboy Transmission Mount Insert #KB-025-BRZ :: 2013 Scion FR-S / Subaru BRZ
|
|
Seibon Carbon TA Style Carbon Fiber Side Skirts #SS1213SCNFRS-TA :: 2013 Scion FR-S / Subaru BRZ
|
|
DSS Pro Level Axle / Hub Kit #TO86 :: 2013 Scion FR-S / Subaru BRZ
|
|
|
|
|
|
|
|
That Kartboy Transmission Mount Insert installs easily into the void in the factory mount giving you an instant change in shift feel.
|
These side skirts provide an ultra clean look without covering much of your stock parts.
|
The 1000HP Pro-Level kit for the 2012 Scion FR-S / Subaru BRZ / Toyota GT86 is a complete rear system including both axles, hubs and ARP extended studs. The axles feature our our aerospace grade torsional 36 spline axle bars, and a billet ball & cage inner cv with our high grade inner differential spline for the differential, and a proprietary outer CV with a larger spline. The hubs are made to accomodate the larger spline and are also able to accept the factory ABS ring. Rated to 1000HP with a 1-year warranty.
|
|
|
|
DSS 600HP Direct Bolt in Rear Axles #RA8600X2 :: 2013 Scion FR-S / Subaru BRZ
|
|
DSS Carbon Fiber 1 Piece Driveshaft #TOSH86-C :: 2013 Scion FR-S / Subaru BRZ
|
|
GrimmSpeed Hood Strut Kit :: 2013 Scion FR-S / Subaru BRZ
|
|
|
|
|
|
|
|
We have been working with some of the top Drift teams on this set of axles and are happy to announce the new 600HP Level 2 axles. Starting with the direct-fit billet chromoly outer CV from our Subaru axles, 300M center bars made from the material we are getting out of Sweden, which is by far some of the best material we have used to date. We then went on to make the inner splines out of the same material, and used a 108mm Porsche-style inner CV with upgraded chromoly internals to top it off. This set of axles was designed with punishment in mind so don't be easy on them.
|
By removing the factory 2-piece shaft and installing a single shaft, the car will feel more responsive due to the lighter weight of the shaft and also the fact that the hanger bearing is not moving up and down during acceleration. Available for most popular motor/trans combinations, if you don’t see yours listed, custom shafts are also available. 12.2lbs
|
Engineered to perfection, the Grimmspeed Hood Strut Kit is what your vehicle needs! They took the time to make brackets which are easy to install, fit well, and will stand the test of time. The gas shocks allow your hood to stay locked up in a higher position than the stock hood prop without damaging it.
|
|
|
|
Eibach Pro-Alignment Kit for Front #5.81280K :: 2013 Scion FRS / Subaru BRZ
|
|
Seibon Carbon VS Style Carbon Fiber Hood #HD1213SCNFRS-VS :: 2013 Scion FR-S / Subaru BRZ
|
|
Seibon Carbon TS Style Carbon Fiber Hood #HD1213SCNFRS-TS :: 2013 Scion FR-S / Subaru BRZ
|
|
|
|
|
|
|
|
After the installation of either an Eibach Pro-Kit, Sportline spring kit or Pro-Street coil-over kit, a vehicle's alignment should always be checked. Once a vehicle is lowered, wheel camber may become excessively negative, meaning the top of the tire is angled inward (toward the center of the vehicle).
|
As air passes over this hood, hot air is extracted from the engine baby. Style with purpose!
|
Two sets of extractor vents add style to this carbon fiber hood.
|
|
|
1,000's of Aftermarket Camaro Parts & Accessories
Performance and Styling Parts
Professional Installations and Dyno Tuning at Phastek
Professional Installations 
Lighting Installations 
Performance Upgrades 
Chassis Dyno Tuning 
