|
|
|
|
|
|
Phastek factory Skip-Shift Eliminator for 2010-2013 CTS-V (Manual Transmission)
|
|
Retail Price: $29.99
Sale Price: $22.95
You save $7.04!
|
|
|
Decide for yourself what gear you want to be in! Dump that annoying first-to-fourth "skip-shift" GM incorporates into the 6-speed Camaro, Firebird, Ctsv, Corvette, GTO, GXP and Dodge Challenger with this Skip-Shift Eliminator. This PLUG IN piece requires no additional modifications to your vehicle. With it in place, you take complete control over gear selection. Isn't that why you got a 6 speed? Plug in installation. Shipped complete with everything you need including easy installation instructions. Not legal for use on pollution controlled motor vehicles.
|
|
|
|
|
|
|
|
|
|
METCO LSA Supercharger Isolator #LSA0001 :: 2012-2013 Camaro ZL1
|
|
Retail Price: $65.95
Sale Price: $54.99
You save $10.96!
|
|
|
The supercharger isolator is part of the supercharger drive assembly and is located in the supercharger snout. The original isolator as installed at the factory contains a spring mechanism and is notorious for noise and a short service life.
|
|
|
|
|
|
|
|
|
|
Night Rider LED Scanner 22" :: All Vehicles
|
|
Retail Price: $74.95
Sale Price: $59.95
You save $15.00!
|
|
|
V2.0 Scanner is a 22" long Scanner Containing 48 Amazingly Bright Super-Flux LED! 22" FITS FRONT MAIL SLOT ON SS CAMAROS
|
|
|
|
|
|
|
|
|
|
V2 22" Dynamic RGB Multicolor LED Scanner Bar #V2SCAN22DRGB :: 2010-2013 All Vehicles
|
|
Retail Price: $105.95
Sale Price: $99.95
You save $6.00!
|
|
|
V2.0 Scanner is a 22" long Scanner Containing 48 Amazingly Bright 5050 ColorSHIFT SMDs! Capable of cycling through many colors. There are endless possibilities for the use of this bar. It can be used for fun, police/firefighter vehicles, job site vehicles, etc. 22" FITS FRONT MAIL SLOT ON SS CAMAROS
|
|
|
|
|
|
|
|
|
|
METCO LSA Supercharger Idler Pulley :: 2012-2013 Camaro ZL1
|
|
Retail Price: $129.99
Sale Price: $99.99
You save $30.00!
|
|
|
In ZL1 applications using a smaller than stock supercharger pulley, belt slippage at higher engine speeds can reduce both boost and power. The larger diameter of this pulley serves to increase belt wrap at the supercharger pulley, as well as increase tension on the supercharger belt. This pulley is an easy bolt-on solution to troublesome belt slippage.
|
|
|
|
|
|
|
|
|
METCO LSA Tensioner Pulley #MTP-LSA :: 2012-2013 Camaro ZL1
|
|
Retail Price: $124.95
Sale Price: $119.99
You save $4.96!
|
|
|
This heavy-duty pulley is designed to replace the original tensioner pulley on the supercharger drive of the LSA engine. This pulley is precision-machined from high-grade billet aluminum and fitted with dual bearings for unmatched durability.
|
|
|
|
|
|
|
|
|
|
METCO LSA Idler Pulley Relocation Bracket #MRB1000 :: 2012-2014 Camaro ZL1
|
|
Retail Price: $129.95
Sale Price: $119.99
You save $9.96!
|
|
|
This precision-machined idler relocation bracket is designed specifically for the GM LSA application. The bracket installs as a direct replacement for the original, but moves the Metco 50mm crank idler pulley (bottom) away from the crank pulley to allow for drive rings larger than 9.55". Another important benefit is that the 100mm supercharger idler pulley's position (top) is optimized to improve belt wrap at the supercharger pulley, which is crucial in applications using a smaller-than-stock supercharger pulley.
|
|
|
|
|
|
|
|
|
|
Actron Autoscanner Scan Tools - Diagnostic Scan Tool #CP9575C :: All ODB II Vehicles
|
|
Retail Price: $139.95
Sale Price: $129.95
You save $10.00!
|
|
|
These Actron Autoscanner scan tools feature the ability to display generic and manufacturer specific codes and definitions. They also have six modes of OBD II data, are trilingual, freeze frame data, state OBD check for emissions, drive cycle and much more.
|
|
|
|
|
|
|
|
|
|
SLP Timing Chain, LS3/ZL415/ZL427 Double-Roller 3-Bolt Cam Gear #55004 :: 2009-2012 CTS-V
|
|
Retail Price: $179.95
Sale Price: $159.95
You save $20.00!
|
|
|
This double-roller timing-chain set is a perfect complement to our high-performance camshafts and engine packages. It offers greatly enhanced strength and accuracy compared with the stock piece, and even allows for timing adjustments (advance or retard) of up to 8 degrees.
|
|
|
|
|
|
|
|
|
|
METCO LSA Supercharger Pulley Upgrade (increase horsepower and torque) :: 2012-2013 Camaro ZL1
|
|
|
Replace the original supercharger pulley on your CTS-V or ZL1 with one of their precision-made overdrive units to make as much as 3.5-4.5 pounds of additional boost for more more horsepower and torque.
|
|
|
|
|
|
|
|
|
|
SLP Timing Chain LS3/ZL415/ZL427 Double-Roller Single Bolt Cam Gear #55005 :: 2009-2012 CTS-V
|
|
Retail Price: $219.95
Sale Price: $199.95
You save $20.00!
|
|
|
This double-roller timing-chain set is a perfect complement to our high-performance camshafts and engine packages. It offers greatly enhanced strength and accuracy compared with the stock piece, and even allows for timing adjustments (advance or retard) of up to 8 degrees.
|
|
|
|
|
|
|
|
|
|
Actron Autoscanner Plus Scan Tools - Diagnostic Scan Tool #CP9580 :: All ODB II Vehicles
|
|
Retail Price: $229.95
Sale Price: $222.95
You save $7.00!
|
|
|
These Actron Autoscanner Plus scan tools encompass many professional features in an affordable scan tool. They are compatible with OBD II and CAN vehicles.
|
|
|
|
|
|
|
|
|
|
SLP Camshaft, LS1/LS6/LS2 Hydraulic Roller #51014 :: 2009-2012 CTS-V
|
|
Retail Price: $319.95
Sale Price: $299.95
You save $20.00!
|
|
|
This is our most aggressive camshaft for LS1/LS2/LS6 applications. Designed to produce maximum power in big-cube stroker engines, it also works well in moderately to extensively modified stock-displacement applications.
|
|
|
|
|
|
|
|
|
|
SLP Camshaft, LS1/LS6/LS2 Hydraulic Roller #51015 :: 2009-2012 CTS-V
|
|
Retail Price: $319.95
Sale Price: $299.95
You save $20.00!
|
|
|
Add More power to your CTSV!
Designed specifically for our ZL402 LS1 Gen III and LS2 Gen IV stroker engines, this camshaft will make the most power for these engines.
|
|
|
|
|
|
|
|
|
|
SLP CTSV Camshaft LS1/LS6/LS2 Hydraulic Roller #51016 :: 2009-2012 CTS-V
|
|
Retail Price: $319.95
Sale Price: $299.95
You save $20.00!
|
|
|
Add More power to your CTSV! Designed specifically for our ZL402 LS1 Gen III and LS2 Gen IV stroker engines using the SLP/L92 cylinder heads, this camshaft will make the most torque for these applications. With the proper tuning, this camshaft will idle down to 800 RPM and packaged with our ZL402, it's ideal for your Silverado/Sierra for unbeatable towing power.
|
|
|
|
|
|
|
|
|
|
SLP CTSV Camshaft LS Hydraulic Roller (use w/LS, ZL415, ZL427, Boosted Application 3-Bolt) #51018 :: 2009-2012 CTS-V
|
|
Retail Price: $319.95
Sale Price: $299.95
You save $20.00!
|
|
|
Add more power to your CTSV!
Designed specifically for our ZL415 LS3 & ZL427 LS7 engines using the SLP/L92 cylinder heads, this camshaft will make maximum power on boosted applications
|
|
|
|
|
|
|
|
|
|
SLP CTSV Camshaft LS2 Hydraulic Roller (use w/Stock LS2 Bottom End/SLP 64cc LS3 Cyl Heads 3-Bolt) #51017 :: 2009-2012 CTS-V
|
|
Retail Price: $369.95
Sale Price: $349.95
You save $20.00!
|
|
|
Add More Power to your CTSV!
Designed specifically for use with stock bottom end LS2 engines equipped with SLP's 64cc L92 Cylinder Heads. This camshaft makes 26 HP at its peak and it's largest gain and has 25 ft-lbs of torque at 3700 RPM and 5970 RPM with 14 ft-lb of peak torque. With the proper tuning, this camshaft will idle down to 750 RPM while providing unbeatable mid and upper range power. It also will work in LS1/LQ4 and LQ9 applications.
|
|
|
|
|
|
|
|
|
|
SLP CTSV Camshaft LS2 Hydraulic Roller (use w/Stock LS2 Bottom End/SLP 64cc LS3 Cyl Heads Single Bolt) #51017B :: 2009-2012 CTS-V
|
|
Retail Price: $452.55
Sale Price: $432.55
You save $20.00!
|
|
|
Designed specifically for use with stock bottom end LS2 engines equipped with SLP's 64cc L92 Cylinder Heads. This camshaft makes 26 HP at its peak and its largest gain and has 25 ft-lbs of torque at 3700 RPM and 5970 RPM with 14 ft-lb of peak torque. With the proper tuning, this camshaft will idle down to 750 RPM while providing unbeatable mid and upper range power. It also will work in LS1/LQ4 and LQ9 applications
|
|
|
|
|
|
|
|
|
|
SLP Programmer Handheld (inTune Diablo Sport) #27024T :: 2009-2012 CTSV
|
|
Retail Price: $463.95
Sale Price: $443.95
You save $20.00!
|
|
|
The DiabloSport inTune programmer is the all new successor for the Predator handheld tuner that you’ve come to know and love. The DiabloSport inTune has all of the famous preloaded tunes and available adjustments as the Predator, in a smaller, more advanced, and easier-to-use device!
|
|
|
|
|
|
|
|
|
|
SLP Fuel Injectors, 85 lbs/hr (Set of 8) #12422 :: 2009-2012 CTS-V
|
|
Retail Price: $519.95
Sale Price: $499.95
You save $20.00!
|
|
|
2009 2010 2011 2012 CTSV Fuel Injectors, 85 lbs/hr set of 8 #12422 By SLP
|
|
|
|
|
|
|
|
|
|
SLP Fuel Injectors, 65 lbs/hr (Set of 8) #12421 :: 2009-2012 CTS-V
|
|
Retail Price: $549.95
Sale Price: $529.95
You save $20.00!
|
|
|
2009 2010 2011 2012 CTSV Fuel Injectors, 65 lbs/hr set of 8 #12421 By SLP
|
|
|
|
|
|
|
|
|
|
DiabloSport Trinity T-1000 Tuner :: Most Vehicles
|
|
Retail Price: $799.99
Sale Price: $599.95
You save $200.04!
|
|
|
DiabloSport Trinity T-1000 ---- Tuner - Data Logger - Display & More! +ADD 15-20 RWHP. +ADD 15-20 RWTQ. +ADD 1-3 MPG. TUNER & DATA LOGGER in ONE! Convert back to the stock tune at any time!
Customer Reviews: 
|
|
|
|
|
|
|
|
|
|
Stainless Works Cadillac 6.2L Exhaust 3" Dual Turbo System (Stainless Steel) #CTSV09CB :: 2009-2012 Cadillac CTS-V
|
|
Retail Price: $1,150.00
Sale Price: $1,050.00
You save $100.00!
|
|
|
Improve performance, sound and mileage with our Cadillac CTS-V 2009+ Exhaust. Made from high quality 304L stainless steel, catback includes Dual Turbo mufflers, X-Pipe and slash-cut conical double-wall tips. Choose your fit: factory connect (to factory manifolds) or performance connect (to Stainless Works CTS-V headers).
|
|
|
|
|
|
|
|
|
|
SLP Rocker-Arm Package, LS3 Aluminum Off-Set w/High-Lift Springs/Retainers/Keepers (1.85 ratio) #50190 :: 2009-2012 CTSV
|
|
Retail Price: $1,254.80
Sale Price: $1,154.80
You save $100.00!
|
|
|
SLP's 1.85 RATIO ALUMINUM ROCKER ARM PACKAGE is designed as a true bolt-on replacement for LS3 engines. These rockers require NO valve cover or cylinder head modifications
|
|
|
|
|
|
|
|
|
|
Stainless Works 6.2L Headers (Stainless Steel) #CTSV09CPH :: 2009-2012 Cadillac CTS-V Coupe
|
|
Retail Price: $1,290.00
Sale Price: $1,190.00
You save $100.00!
|
|
|
Cadillac CTS-V 2009+ Coupe Headers feature 2-inch primaries with 3" lead pipes. Choose between high-flow catalytic converters or off-road leads. Currently our Coupe headers are only Performance Connect to fit to Stainless Works CTS-V exhaust.
|
|
|
|
|
|
|
|
|
|
Stainless Works 6.2L Headers (Stainless Steel) #CTSV09H :: 2009-2012 Cadillac CTS-V 6.2L Sedan & Wagon
|
|
Retail Price: $1,290.00
Sale Price: $1,190.00
You save $100.00!
|
|
|
Cadillac CTS-V 2009+ Sedan & Wagon Headers feature 2-inch primaries with 3" lead pipes. Choose between high-flow catalytic converters or off-road leads. Pick your connection: Factory Connect to fit to the factory exhaust or Performance Connect to fit to Stainless Works CTS-V exhaust.
|
|
|
|
1,000's of Aftermarket Camaro Parts & Accessories
Performance and Styling Parts
Professional Installations and Dyno Tuning at Phastek
Professional Installations 
Lighting Installations 
Performance Upgrades 
Chassis Dyno Tuning 
