Features:
- Natually Aspirated
- Gear Attachement: 3-Bolt
- Usage: Street/Performance
- Valve Springs Required: Yes
- Mildly Aggressive Cam Profile
Cam Specs:
- Intake Duration @ .050"" Lift: 228
- Exhaust Duration @ .050"" Lift: 240
- Intake Valve Lift w/1.8 Rocker Arm Ratio: .630""
- Exhaust Valve Lift w/1.8 Rocker Arm Ratio: .612""
- Lobe Separation (degrees): 118°+4
This hydraulic roller cam is designed for the LS7 engine. This LS7 camshaft will provide a modedrate performance idle and strong performance improvement through the mid-range and upper RPM range.
This cam will deliver a moderate performance idle, optimum low end torque, and extended RPM capabilities over the Cam Motion Mild camshafts. Cam Motion designed this cam as a ""drop in"" camshaft with minimal modifications required. However, the full potential of the camshaft would benefit from additional bolt-on's. These camshafts are designed to be used with the Titanium dual valve springs. They can also be used with the factory lifters and lifter buckets on the LS7 but lifters should be inspected for damage prior to cam installation.
These cams are also offered in the 3 different cam core alloys. Choosing the correct one for your built can be explained below.
Cam Core Alloys Explained:
5150 Alloy - Similar to a factory constructed cam, the 5150 Alloy is perfect for the mild to aggressive street and mild camshafts. This cam will be perfect for the daily/street driven Camaros.
8660 Alloy - The 8660 Alloy has more nickel and carbon in the steel, making for a stronger and more durable camshaft. This cam will be perfect for the weekend racer that does participate in a few track events each year.
8620 Alloy - The 8620 Alloy goes through a hardening process called carburizing that creates an exemplary combination of strength and wear characteristics. This cam will be perfect for the hardcore racer that participates in weekly weekend races and high endurance races with their Camaro.
Suggested Component Upgrade (see options above):
Cam Motion 7.800"" Chromoly Pushrods - PS178001208 (Factory LS7 Length)
Cam Motion 7.850"" Chromoly Pushrods - PS178501209
Cam Motion .685"" Lift Dual Valve Springs Titanium Retainers w/OEM Style Guide - VSK243201
Part Numbers:
5150 Steel Alloy - 03-01-0008
8660 Steel Alloy - 03-04-0008
8620 Steel Alloy - 03-08-0008