Home > Phastek >

Phastek Custom Washer Tank and Intake Scoop Combo :: 2010-2015 Camaro V6/SS/1LE
2010-2015 Camaro Washer Tank and Intake Scoop Combo for Cold Air Intakes


 
Alternative Views:


List Price: $129.90
Our Price: $116.91
You save $12.99!


Availability: In-Stock and Ready to Ship

- Product Code -
:
PHASTEK-CAMARO-12216

Product Description Warranty Information Installation Instructions
 

Custom Camaro Washer Tank and Intake Scoop Combo by Phastek!

- Fits all 2010-2015 Camaro V6/SS/1LE models w/ AFTERMARKET Air Intakes installed (excluding Airaid intakes)
- FITS ALL Aftermarket Cold Air Intakes!!
*Note: Does not fit with Airaid aftermarket intakes

Phastek has put a package together that includes the Windsheild Washer Tank Replacement (#122115) and the Intake Scoop (#83115)

Add performance to your Camaro with the Phastek Performance Cold Air Intake Scoop. This scoop is designed to redirect the incoming air from your lower Camaro grille to your aftermarket cold air intake giving you better air flow at driving speeds. You will find that the Air Intake Scoop works with many aftermarket air intakes like Cold Air Inductions (CAI), Roto-Fab, K&N Intakes and others where the bottom of the air induction is open to the fender well. Comes pre-drilled for the Phastek Windshield Washer Fluid Tank Relocation kit.

When upgrading to the Phastek Performance Air Intake Scoop (#83115), you will have to discard the factory windshield washer fluid tank to fit the air intake scoop. Phastek has created a solution that allows full function of a windshield washer system and also allows you to use your factory washer pump from the original washer fluid tank. The tank in this kit is a direct bolt-on* to the air intake scoop.

This combo kit gives you the ability to mount to most aftermarket cold air intakes heat shield. Some examples of cold air intakes that will accept the washer kit are Roto-Fab, CAI, K&N, AFE, Airaid, BBK,& Volant.

Combo Kits Comes Complete with:
  • Steel Structure
  • Welded Seams
  • Black Powder Coated
  • Stainless Steel Hardware
  • 2 Quart Molded Plastic Reservoir with Vented Cap
  • 3 Feet of Clear Tubing
  • Black Remote Fill Tank with Vented Cap (Fill Cap has Washer Fluid Logo)
  • 6 Stainless Steel Bolts
  • 12 Stainless Steel Washers
  • 6 Stainless Steel Nylon Locking Washers
  • 2 Hose Clamps
  • Installation Instructions.

*Note: You will have to remove the Factory Windshield Washer Bottle to install the Air Intake Scoop.
*Note: To mount the fill tank you will be required to drill 2 holes.

A washer tank relocation kit has been created as a solution that allows full function of a windshield washer system and also allows you to use your factory washer pump from the original washer fluid tank.




Average Customer Review: Average Customer Review: 4.5 of 5 4.5 of 5 Total Reviews: 26   Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Washer tank/intake scoop October 3, 2019
Reviewer: philip walker from centralia, WA United States  
Both pieces are made from heavy duty materials, fit and finish are excellent. I was going to fabricate my own scoop but Phastek came through. Highly recommended
.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 September 28, 2019
Reviewer: Mike Potton from Mono, ON Canada  
Build quality is superior and incredibly easy to install.  Very impressed with the quality and price. Just remove half of the inner wheel well. Took less than 30 mins and moving the washer tank definitely opens up space for more cool air .

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Solid product. High quality and simple install September 19, 2019
Reviewer: Hooligan from Shrewsbury, MA United States  
Very high quality product. Thick metal and tubing; all hardware included.
Instructions are rough BUT once you start the process things fall into place. I removed the front bumper (dont be afraid it was EASY!) But you can do install through the wheel well.  
I have no performance numbers to back up any gains but it obviously increases air flow. The factory washer bottle takes up nearly all the space in the air box. Moving this and installing the scoop will allow ALOT more air into the airbox. More air = More power!!!
Worth the money if you want the most out of your CAI.

As always Phastek came through with flying colors! Thank you guys!


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect fit for my Camaro SS 2010 July 25, 2019
Reviewer: Jose Fernando Hasbun from DORAL, FL United States  
Perfect fit for my Camaro SS 2010 M6.
It really works. My tuner always told me that the air went very hot to the filter, now we test it and it enters 2 degrees higher than the outside temperature, the temperature and the flow improve a lot. Good product I recommend it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Air scoop July 22, 2019
Reviewer: Anonymous Person from Monroe, GA United States  
Fun install. Depending on the type of intake you have, allows for different mounting positions with the fill nozzle. Air scoop is straight forward and simple.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Phastek
Camaro Performance Parts > Cold Air Intakes ('10-'18)
BBK Cold Air Intake
Parts Categories & Accessories > Most Popular Camaro Parts!
Performance Upgrades ('10-'13) > V6 LS/LT Performance ('10-'13) > Cold Air Intakes ('10-'13)
Performance Upgrades ('10-'13) > V8 SS Performance ('10-'13) > Cold Air Intakes ('10-'13)
Performance Upgrades ('10-'13)
Cold Air Inductions (CAI) Intake
Injen Cold Air Intakes
Phastek 'X5' Cold Air Intake
K&N Cold Air Intake
aFe Cold Air Intake
Roto-Fab Cold Air Intakes
SLP Cold Air Intakes
Volant Cold Air Intake
Parts Categories & Accessories > Shop by Brand > Phastek Performance
2010-2013 Camaro Parts
Shop by Year > 2014-2015 Camaro Parts (all models)
Performance Upgrades ('14-'15)
Performance Upgrades ('14-'15) > V6 LS/LT Performance ('14-'15) > Cold Air Intakes ('14-'15 V6)