2016+ Camaro LT 4-Cyl 2.0L Turbo Performance Parts & Upgrades

MMICP-CAM4-16K

MMAI-CAM4-16

MMICP-CAM4-16K

MMICP-CAM4-16C

MMICP-CAM4-16H

(2.0T Camaro) Max Gains of +24 Horsepower and +25 lbs-ft Torque, Outflows factory intake by 21%, Sealed Air Filter Housing with Auxiliary Air Inlet for High Performance! #51-74212

(2.0T Camaro) Max Gains of +24 Horsepower and +25 lbs-ft Torque, Outflows factory intake by 21%, Sealed Air Filter Housing with Auxiliary Air Inlet for High Performance! #54-74212

In testing, this down-pipe produced a max gain of +18 horsepower and +21 ft. lbs. of torque. #48-34126-HC

Mishimoto Oil Catch Can / Air Seperator for your I4 2.0T 2016+ Camaro

Mishimoto Oil Catch Can / Air Seperator for your I4 2.0T 2016+ Camaro

Mishimoto Oil Catch Can / Air Seperator System for your I4 2.0T 2016+ Camaro

Replacement radiator expansion tanks with built in reservoir for all 2016 & 2017 model year (Gen 6) Camaros

(1)

Adding this muffler to the 11933 Rear Section and the 60622 Mid-Pipe assembly will achieve the "Touring" sound level or it can be used with the 11934 ATAK® rear section and the 60622 Mid-Pipe to make a quieter version of the ATAK®. #60624

3" Downpipe for Camaro 2.0L Turbocharged engines. #60623

Simple Plug & Play Installation: Improves vehicle acceleration and the overall driving experience is much better. V2 #PX1415GM

(2)

The MRT Version 2 Axle-Back exhaust system designed for the LTG 4 cylinder 6th Generation Camaro will increase the overall exhaust volume with a deepened exhaust note. This system is made from 2.5" 304 stainless steel featuring a limited lifetime warranty. #91U821

The MRT Version 2 Cat-Back exhaust system produces a deeper performance type exhaust note. This system is made from a combination of 3" and 2.5" 304 stainless steel tubing to improve the rate at which the exhaust gases are expelled resulting in performance increases. #92U821

Muffler Delete Cat-Back - The MRT Version 3 Cat-Back exhaust system designed for the LTG 4 cylinder 6th Generation Camaro produces an deep aggressive exhaust note. This system is made from a combination of 3" and 2.5" 304 stainless steel tubing, featuring a limited lifetime warranty. #92U822

Muffler-Delete Axle Back - The MRT Version 3 Axle-Back exhaust system for the LTG 4-cylinder turbo 6th Gen Camaro - deep aggressive exhaust note. #91U822

Adding this Mid-Pipe/Y-Pipe to a rear section will give you all the elements of a Cat-Back™ system. #60622

(1)

Injen "Evolution" Cold Air Intake for the 2016+ Camaro EcoTec Turbocharged Engine. +34 Horsepower & +42 lb/ft of Torque. #EVO7300

(4)

Borla S-Type Axle-Back Exhaust System for 2016+ Camaro 4-Cyl 2.0L Turbocharged models with Dual-Exit-Exhaust-Tips #11933

(2)

Borla ATAK Axle-Back Exhaust System for 2016+ Camaro 4-Cyl 2.0L Turbocharged models with Dual-Exit-Exhaust-Tips #11934

(1)

Brand new Injen cold air intake for the 2016+ Camaro 4Cyl Turbo helping you to gain up to +26 HP and +26 LBS. of torque (polished). PF7017P

(1)

Brand new Injen cold air intake for the 2016+ Camaro 4Cyl Turbo helping you to gain up to +26 HP and +26 LBS. of torque (wrinkle black). PF7017WB