You are here: Home > Performance Upgrades ('10-'13) > V8 SS Performance ('10-'13) > Engine & Fuel Upgrades ('10-'13)
Choose a Category below:
Camshafts & Valvetrain ('10-'13)

2010-2013 Camaro Aftermarket Engine & Fuel Upgrades

From Camshafts to Oil Catch Cans to Fuel Injectors


Sort By:
Page of 6
Billet Oil Catch Can #BC-175 by Billet Custom 2010-2015 Camaro Oil Catch Can :: Fits all 2010-2015 Camaro models

Choose from 6 color options.
This catch can traps oil before entering intake, improves fuel economy & performance, and eliminates detonation from oil in the cylinder. #BC-175

Retail Price: $109.95
Sale Price: 89.95
You save $20.00!

(38)
Camaro Oil Catch Can Air/Oil Separator Tank (Oil Catch Can) #85487 by Moroso - Universal fit for all 2010-2015 Camaro models Air/Oil Separator Tank, Large Body :: Fits 2010-2015 Camaro SS/ZL1

These Moroso air/oil separator tanks can be used as remote separators and filters on vacuum pump systems. They are manufactured from aluminum and feature a natural finish with a Moroso decal. #85487

Retail Price: $169.95
Sale Price: 158.95
You save $11.00!

(13)
2010-2015 Camaro SLP 160 Thermostat 100229 160* Thermostat :: Fits 2010-2015 Camaro SS

160º thermostat for 2010-2015 LS3/L99 Camaro. These low-temp thermostats dramatically reduce operating temperatures, while increasing thermal efficiency and your engine's performance in the process.This new thermostat replaces the factory unit, allowing coolant to circulate at lower engine temperatures, keeping the engine cooler. #100229
Expedited Shipping Options are available for this product!

Retail Price: $49.99
Sale Price: 29.95
You save $20.04!

(14)
JET Mass Air Flow Sensor 2012-2015 Camaro V6 69126 LS LT Mass Air Flow Sensor Upgrade :: Fits 2012-2015 Camaro LS/LT V6

The JET Powr-Flo Mass Air Sensor delivers improved horsepower, torque and mileage by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. +ADD RWHP! #69180

Retail Price: $229.95
Sale Price: 187.46
You save $42.49!

(9)
2010-2015 Airaid Throttle Body Spacer Camaro V6 200-630-1 PowerAid® Throttle Body Spacer Throttle Body Spacer :: Fits 2010-2015 Camaro LT/LS V6

Airaid Throttle Body Spacer 2010 Camaro V6 PowerAid® Throttle Body Spacer; Easy To Install w/Basic Hand Tools; Fits: CADILLAC CTS 2008-2010 V6 3.6L, V6 3.0L CHEVROLET CAMARO 2010-2010 V6 3.6L. #200-630-1
Expedited Shipping Options are available for this product!

Retail Price: $189.99
Sale Price: 151.91
You save $38.08!

(7)
Airaid Throttle Body Spacer 2010 2011 2012 2013 2014 Camaro SS 250-634 PowerAid®; Throttle Body Spacer; Easy To Install w/Basic Hand Tools; Throttle Body Spacer :: Fits 2010-2015 Camaro SS

Airaid Throttle Body Spacer 2010+ Camaro SS PowerAid®; Throttle Body Spacer; Easy To Install w/Basic Hand Tools. #250-634
Expedited Shipping Options are available for this product!

Retail Price: $154.39
Sale Price: 123.51
You save $30.88!

(7)
2010-2015 Camaro SS JBA 'Power Cables' Ignition Wires, 8mm Red #W0812 PowerCables™ Ignition Wires, 8mm (Red) :: Fits 2010-2015 Camaro SS

When upgrading the performance of your new SS Camaro, you will want to upgrade your ignition wires to a set of JBA PowerCables™. JBA's performance ignition wires feature ultra-low resistance wire-wound mag conductors that allow more spark energy to reach the spark plug without electronic interference. #W0812
Expedited Shipping Options are available for this product!

Retail Price: $98.78
Sale Price: 69.15
You save $29.63!

(5)
2010-2015 Camaro SS VR Power Wedge By Vararam Throttle Body Power Wedge :: Fits 2010-2015 Camaro SS

The Power wedge was born from the VRX Intake manifold program. Our research showed that most of the OEM manifolds had the intake manifold neck pointed upward at about 8 degrees. #LS3-POWER-WEDGE

Retail Price: $124.95
Sale Price: 99.95
You save $25.00!

(7)
2010-2015 Camaro SS LS Chromoly Pushrods by BTR LS Chromoly Pushrods :: Fits 2010-2015 Camaro SS

.660" Lift Dual Spring Kit for LS engines using stock rocker arms.  Includes dual polished springs, matching titanium retainers, locators for stock guides, locks and seals. #PR7350312, PR7375312, PR7400312

Retail Price: $99.00
Sale Price: 89.00
You save $10.00!

(4)
2010 2011 2012 2013 Camaro Tensioner Pulley METCO Heavy Duty Tensioner Pulley :: Fits 2010-2013 Camaro SS

This 87mm 6-rib pulley is slightly smaller than the OEM pulley, but serves to optimize belt tension as indicated on the factory tensioner indicator. This pulley represents a simple and inexpensive way to enhance the underhood appearance of your new Camaro or CTS-V and add durability at the same time. #MIP-2010
Expedited Shipping Options are available for this product!

Retail Price: $99.99
Sale Price: 79.95
You save $20.04!

(3)
BBK Throttle Body 2010-2015 Camaro SS V8 LS3 95mm Throttle Body :: Fits 2010-2015 Camaro SS

Camaro Part Video available
BBK's 95mm throttle body unit on slightly modified cars will yield gains of around 11 hp and 14 ft/lbs torque with the factory tune. #1789

Retail Price: $419.99
Sale Price: 379.99
You save $40.00!

(6)
2010-2015 Camaro V6 SLP Harmonic Balancer / 25% Underdrive Pulley #100232A Harmonic Balancer/25% Underdrive Pulley :: Fits 2010-2015 Camaro LS/LT V6

SLP's new 25% underdrive balancer for the 2010-2011 Camaro V6 incorporates a number of high quality features you won't find on any other aftermarket unit and makes up to 6 additional rear wheel horsepower and 4 ft-lbs of rear wheel torque. Among these features are a pair of extra tall belt retention walls that eliminate the belt slippage issues common with other balancers. #100232A

Retail Price: $269.95
Sale Price: 255.95
You save $14.00!

(3)
2010 2011 2012 2013 Holley Camaro Engine Coil Covers fits 2010 Camaro, 2011 Camaro, and 2012 Camaro, part number 242-1 Coil Covers :: Fits 2010-2013 Camaro SS

Holley Camaro Coil Covers for your  2010-2013 Camaro SS, 2011 Camaro SS, and 2012-2013 Camaro SS -  #242-1

Retail Price: $249.95
Sale Price: 183.95
You save $66.00!

(3)
2010-2015 Camaro SS MSD Super Conductor Wires 32829 Super Conductor Spark Plug Wires (Red) :: Fits 2010-2015 Camaro SS

The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance!  #32819

Retail Price: $129.99
Sale Price: 74.99
You save $55.00!

(4)
2012-2015 Camaro ZL1 Fuel Pump GM 19258436 for sale 2010 2011 Camaro SS ZL1 Fuel Pump Module :: Fits 2010-2015 Camaro SS

Production fuel pump module for the 2012 Camaro ZL1 with supercharged LSA engine. Supports approximately 600 horsepower. Direct replacement for 2010+ Camaro SS fuel pump modules. 250 liters per hour capacity at 65 psi. Pulse-width modulated, eliminates need for conventional pressure regulator. Kit includes fuel pump module/sender assembly, tank seal, and instruction sheet. #19258436/#19260557

Retail Price: $420.00
Sale Price: 289.95
You save $130.05!

(4)
2012-2013 Camaro ZL1 LSA Supercharger Isolator #LSA0001 by METCO LSA Supercharger Isolator :: Fits 2012-2013 Camaro ZL1

The supercharger isolator is part of the supercharger drive assembly and is located in the supercharger snout. The original isolator as installed at the factory contains a spring mechanism and is notorious for noise and a short service life. #LSA0001
Expedited Shipping Options are available for this product!

Retail Price: $65.95
Sale Price: 59.95
You save $6.00!

(3)
2010-2015 Camaro SS / ZL1 .660" Lift Platinum Valve Spring Kit with Steel Retainers for LS3 / LSA Engine #SK001 by BTR .660" Lift Platinum Valve Spring Kit w/Steel Retainers for LS3/LSA Engine :: Fits 2010-2015 Camaro SS/ZL1

.660" Lift Dual Spring Kit for LS engines using stock rocker arms.  Includes dual polished springs, steel retainers, locators for stock guides, locks and seals. #SK001

Retail Price: $239.95
Sale Price: 219.00
You save $20.95!

(4)
Camaro Motor Mount Kit #MM004, Polyurethane Bushings, by BMR - Fits all 2010-2015 Camaro models Motor Mount Kit, Polyurethane Bushings :: Fits 2010-2015 Camaro SS

Reduce engine movement and improve throttle response on your 2010-Up Camaro with Polyurethane Motor Mounts from BMR Suspension. These mounts are constructed from ¼-inch steel plate, aircraft-grade 7075 billet aluminum, and high-durometer polyurethane bushings. #MM004

Retail Price: $311.94
Sale Price: 259.95
You save $51.99!

(3)
2010-2015 Camaro Valve Cover Breather METCO 2011 Valve Cover Breather Upgrade :: Fits 2010-2015 Camaro SS

This valve cover breather assembly replaces the original oil fill tube on the passenger side factory valve cover. The base is CNC-machined from billet aluminum for precise fit, and the included silicone O-ring is specially designed to prevent oil seepage at the base of the breather. The filter base is microfinished for surface protection and good looks... #MBR0003
Expedited Shipping Options are available for this product!

Retail Price: $69.99
Sale Price: 46.99
You save $23.00!

(3)
2010 2011 2012 2013 Camaro Fuel Pressure Gauge Rail 2011 Fuel Rail Mounted Fuel Pressure Gauge :: Fits 2010-2013 Camaro SS

The key to this kit is the billet adapter fitting. It is CNC-machined for precision fit and leak-free performance and attaches directly to the schrader valve outlet on the factory GM fuel rail. #MFP0001
Expedited Shipping Options are available for this product!

Retail Price: $99.99
Sale Price: 48.99
You save $51.00!

(2)
2010-2015 Camaro SS Lingenfelter GT9 Camshaft #L210150309 GT9 Camshaft :: Fits 2010-2015 Camaro SS/ZL1

The Lingenfelter GT9 camshaft was designed Lingenfelter based on extensive engine dyno testing with our LS9 ZR1 engine. The GT9 camshaft was used in both the Lingenfelter cars that won 1st and 2nd place at the 2010 LSX Shoot out. #L210150309

Retail Price: $429.94
Sale Price: 386.95
You save $42.99!

(2)
2010 2011 Camaro V6/LS/LT JET Mass Air Flow Sensor Upgrade #69126 Mass Air Flow Sensor Upgrade :: Fits 2010-2011 Camaro LS/LT V6

The JET Powr-Flo Mass Air Sensor delivers improved horsepower, torque and mileage by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. +ADD RWHP! #69126

Retail Price: $199.95
Sale Price: 158.96
You save $40.99!

(2)
ZEX 2010 2011 2012 2013 2014 2015 Camaro V8 Nitrous System 82380 Nitrous System (175HP) :: Fits 2010-2015 Camaro SS

ZEX 2010-2015 Camaro V8 Nitrous System - The first nitrous system on the market specifically designed for the new 2010+ Chevy Camaro V8, instantly delivering up to 175 additional horsepower. #82380/82380B

Retail Price: $699.99
Sale Price: 579.95
You save $120.04!

(2)
2012 2013 2014 2015 Camaro ZL1 LSA Double Bearing Idler Pulley - 50mm Double Bearing Idler Pulley (50mm) :: Fits 2012-2015 Camaro ZL1

We offer this replacement idler pulley in a reduced diameter (2.00") to provide the necessary clearance for overdrive crank pulley rings. This idler pulley installs as a direct replacement for the factory idler located at the 10 o'clock position relative to the crank pulley. Our pulley even uses the original pulley bolt for installation. #MIPDPR-50
Expedited Shipping Options are available for this product!

Retail Price: $99.99
Sale Price: 89.99
You save $10.00!

(2)
Injector Dynamics 850cc Injectors #850.34.14.15.8 by Injector Dynamics - fits all 2010-2015 Camaro SS LS3 & L99 models 850cc Fuel Injectors by Injector Dynamics :: Fits 2010-2015 Camaro V8 LS3/L99/LSA

The id850 Injectors (set of 8) will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for even the smallest engines. This makes the ID850ideal for emissions compliant OEM applications while offering the high flow rates required for mildly boosted motors. #850.34.14.15.8

Retail Price: $960.00
Sale Price: 944.00
You save $16.00!

(2)
2010 2011 2012 2013 Chevrolet Camaro SS LS3 & L99 FAST LSXR High Performance Intake Manifold 146102 LSXR 102mm Intake Manifold :: Fits 2010-2015 Camaro SS

2010 Chevrolet Camaro SS LS3 & L99 FAST LSXR High Performance Intake Manifold ** Tune for Low-End or Top-End Power! **
ADDS 14+ HORSEPOWER, ADD 11+ TORQUE. #LSXR-146102B

Retail Price: $1,193.44
Sale Price: 923.95
You save $269.49!

(2)
2012 2013 Camaro ZL1 Interchangeable Crank Pulley Ring by METCO LSA Interchangeable Crank Pulley Ring :: Fits 2012-2013 Camaro ZL1

These are the individual crank pulley rings used with the Metco Interchangeable Crank Pulley Kit for the GM LSA engine. If you have a Metco kit installed on your car, you can buy the rings separately for a quick and easy change to the boost level. #MCR0000V
Expedited Shipping Options are available for this product!

Retail Price: $139.95
Sale Price: 119.99
You save $19.96!

(2)