2010-2013 Camaro Suspension Springs & Sway Bars

Check out our exclusive drop springs for your 2010-2015 Camaro SS & V6. 1.5" Front and 1.4" Rear suspension lowering. These are the same springs featured on the Phastek Camaro and the 2010 X5 Camaro SS. #BG-DROP-SPRINGS-CAMARO

(21)

Lower your ride to give it the right look, with an aggressive stance and a lower center of gravity. Springs provide a firm, but not harsh ride. Each gray powder coated spring is precision wound using the highest quality steel. Hotchkis kits are designed to work with OE engine applications. #19110

(15)

Blending aesthetics and performance, BMR has designed the SP077 for the street performance crowd who want to use their cars in a variety of application. #SP077

(14)

Eibach Pro-Kit - Performance Lowering Springs - 1" Front, 1" Rear - Set of 4. Pro-Kit (Performance Lowering Springs) for SS. #38144

(6)

BC Racing's BR model is perfect for street driving and occasional road course duty. With easily accessible adjustment knobs for fine tuning your compression/rebound and separately adjustable ride height, having a performance coilover system couldn’t be any easier. #80-62-180-8-V, 110-62-170-10-V

(5)

1" Lowering Springs (Set of 4). 220 lb/in front spring & a 460 lb/in rear spring. Car responds with a firm, yet comfortable ride, with much improved handling characteristics. #SP019

(5)

Introducing X5 1" Drop Springs - 4 piece set, a collaboration between Phastek Performance & revered aftermarket brand B&G Suspension. Designed to not only improve your Camaro's appearance, but performance as well. These 1" drop springs are cold wound from high tensile silicone wire and individually super blocked & computer tested against high tolerances.#BG-DS-1

(4)

The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. It's Eibach's legendary spring system that dramatically improves both a vehicle'ss performance and appearance. #38143.140

(3)

H&R Sport Springs - Lowering Suspension - Performance Lowering Springs - 1.4" Front, 1.3" Rear - Set of 4. Fits 2010-2015 Camaro. #50778

(2)

BMR swaybars are one of the most noticeable handling improvements you can do for your Camaro. BMR recognizes this need and has a solution that not only increases roll resistance but does so with very minimal decrease in ride quality. #SB016

(2)

The goal is neutral, predictable handling. Eibach Anti-Roll Bars are cold-formed from high strength aircraft grade steel and are carefully designed to fit your vehicle without modification. #38162.320

(2)

Eibach Camaro Pro-Plus Kit (Pro-Kit Springs & Anti-Roll Sway Bars) #38144.880

(1)

A high-strength tubular 1.25” front bar and three-way adjustable 1.375” rear bar allow you to dial-in the way the car responds to throttle steer and driver input. All the necessary hardware including heavy duty heim joint end links and complete installation instructions are included. #22110

(2)

220 lb/in front spring (1" lower than factory height) - car responds with a firm yet comfortable ride with much improved handling characteristics. #SP020

(1)

BMR lowering springs are specifically designed to provide optimal handling. By using a 220 lb/in front spring and a 460 lb/in rear spring the car responds with a firm yet comfortable ride with much improved handling characteristics. #SP022

(1)

BMR lowering springs are specifically designed to provide handling without sacrificing ride quality. By using a 220 lb/in front spring and a 460 lb/in rear spring (separate purchase) the car responds with a firm yet comfortable ride with much improved handling characteristics. #SP023

(1)

By using a 220 lb/in front spring (separate purchase) and a 460 lb/in rear spring the car responds with a firm yet comfortable ride with much improved handling characteristics. #SP024

(1)

Reduce End Link deflection and increase sway bar effectiveness with heavy duty Sway Bar End Links from BMR Fabrication. #ELK004

(1)

The Camaro begs for more roll resistance to counteract the car's excessive weight. BMR recognizes this need and has a solution that not only increases roll resistance but does so with very minimal decrease in ride quality. #SB030

(1)

This kit consists of a BMR Sway Bar Kit (SB030), 1” Lowering Springs (SP019), and Total Suspension Bushing Kit (BK023). BMR sway bars are cold formed from lightweight tubular DOM steel, feature 3 adjustment locations and integrated thrust washers to prevent horizontal movement. #HPP019

(1)

The sway bar tabs on the OE control arm have proven to be failure-prone when stiffer aftermarket sway bars are installed. The nature of the design itself along with the thin OE material just cannot withstand the additional loading created from higher rate sway bars. BMR has a simple bolt-in solution that not only resolves this issue but can be installed in 45 minutes or less! #ELK009

(1)

Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of your Camaro. #SP052

(1)

Eibach Anti-Roll Bars are cold-formed from high strength aircraft grade steel and are carefully designed to fit your vehicle without modification. #38161.312

(1)

Whiteline sway bar products improve sway bar effectiveness for more balanced and predictable cornering. #KLC177

(1)

The Bilstein B16 PSS10 kit is the ultimate race inspired suspension system, delivering unsurpassed driving performance in any situation. This kit puts you in complete control, providing the kind of precise suspension tuning formerly available only on race cars...

(1)

Enhance the look of your Camaro with a reduced fender well gap. H&R Sport Springs provide a lower center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort... #50778-77

(1)

Megan Racing introduces the new SPEC-RS Coil Over system features 32 levels of damper force adjustment, where compression and rebound adjustments are separate for increased tuning capability. The coil-over body also features separate spring perch adjustment and full shock height adjustment... #MR-CDK-CCA10-RS

(1)

Drastically improve appearance and handling in your Camaro with a new set of drop springs. These powder coated springs have a 1"-1.25" drop and are engineered to optimize the factory shock absorber damping. #410402001V

(1)

Upgrade the suspension in your Camaro and see improvements in both stance and ride quality. This coil set is machined with 6061-T6 aluminum for a strong and lightweight design. #430402001N

(1)

The most recent addition to Megan Racing's expansive coil-over kit line up, the EZ STREET coil-over line up is aimed towards the more budget oriented enthusiast to offer the most basic essentials from an after-market coil-over setup, yet makes no compromises for quality and performance... #MR-CDK-CCA10-EZ

Enhance the look of your Camaro with a reduced fender well gap. H&R Sport Springs provide a lower center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. #50786

Improve the suspension in your Camaro and feel improvements in both stance and ride quality. This featherlight coilover system is machined with 6061-T6 aluminum for a durable and lightweight design. Features a simple ride height control, additional tire clearance, inverted shock design, and adjustable dampners. #430402002N

Includes: Lowering spring kit (1.0" drop), Sway bar kit with bushings, front and rear, Total suspension bushing kit (street version), Subframe connectors, bolt-on, Driveshaft tunnel brace, Toe rods, rear, adjustable, polyurethane bushings, Trailing arms, rear, polyurethane bushings, Lower Control Arms, Rear, Non-adjustable, Poly Bushings.

Improve the cornering performance and traction of your vehicle with a Hotchkis Sway Bar. This bar was deigned to work in conjunction with our Rear Suspension system or as a great stand alone product. The adjustable bar design allows roll stiffness fine tuning for improved handling balance and traction. #22110R

MTI Sport Spring kits are great for a enhance look of your vehical with a lower center of gravity and reduce body roll for better handling on road courses, mountain driving, and everyday cruising. These springs lower the vehical 1.4" in the front and 1.3" in the rear. #CAM10-SPR

2010-2013 Camaro Lakewood Street/Strip  Drag Shocks 50/50 #40524 (pair). This Lakewood rear drag shock is 50/50. Note: GM Part # 92195464 O.E. V6 Camaro rear springs may be required to maintain proper spring seat pressure and are available through your local dealer. #40524

2010-2013 Camaro Lakewood Drag Shocks Front 90/10 #40520 + #40521 (pair). Lakewood front 90/10 struts are for race applications only - supplies maximum weight transfer to the rear wheels with quick rise on the front end.  #40520/40521

2010-2013 Camaro Lakewood Drag Shocks Front 70/30 #40522 + #40523 (pair). Lakewood front 70/30 struts improve handling on both street and strip, when quick front end lift is not needed. For med-high horsepower vehicles with wide tires or low-medium horsepowered cars with slicks. #40522/40523

The Hotchkis Sport Suspension Stage 1 TVS system for the 2010-2013 Camaro offers a sleek lowered stance, dramatically improved handling and superior driver control. Our engineers poured over track testing data to develop a balanced handling system, comfortable enough for the street, but well balanced for the occasional track day or your favorite twisty road. #80115-1

SLP's High Performance Coil-Over Spring and Shock system for the 5th Gen. Camaro was developed and tuned specifically for SLP by Eibach Springs. This system will provide the next level of suspension Technology for customers looking for a more performance-oriented suspension upgrade than our Sport Suspension Spring Package. #70032A

Coil-Overs – Adjustable Ride Height. #38144.711

The Hotchkis Sport Suspension Track Pack system for the 2010-2013 Camaro offers a sleek lowered stance, dramatically improved handling and superior driver control. A balanced handling system, comfortable enough for the street, but well balanced for the occasional track day or your favorite twisty road. #80116

Reduce End Link deflection and increase sway bar effectiveness with heavy duty Sway Bar End Links from BMR Fabrication. Upgrading sway bars on this platform has proven to bend the weak 3/8” diameter OE end links when subjected to aggressive driving maneuvers. #ELK005

Reduce End Link deflection and increase sway bar effectiveness with heavy duty Sway Bar End Links from BMR Fabrication. Upgrading sway bars on this platform has proven to bend the weak 3/8” diameter OE end links when subjected to aggressive driving maneuvers. #ELK006

BMR has a solution that not only increases roll resistance but does so with very minimal decrease in ride quality. #SB017