Home > Camaro Suspension & Handling > Suspension Alignment ('10-'18)

2010-2015 Camaro Suspension Alignment Parts & Help

Use Front Camber Correction Bolts for fine adjustment of the Alignment Specs. Also, some lowered 5th Gen Camaros (2010-2015) may require the use of Offset or Adjustable Rear Lower Control Arms for proper factory or custom Alignment Specs. 2010-2015 Camaro Alignment Specs

Recommended Camaro Suspension & Wheel Alignment Parts:
Sort By:
Page of 1
   
 
(Note: Some Camaro drag racers prefer almost 0 degrees of rear camber, depending on how much the suspension squats when the car launches, for maximum 60' traction in the 1/4 and 1/8th mile. Autocross and Road Course Alignment Specs for Camaros depend on the Tire, Track, and Driver Preference.)

2010-2015 Camaro SS Alignment Specs:

Factory Camaro SS Alignment Specs for stock suspensions:
Front:
  -0.8° Camber
  5.5° to 6.0° Caster
  0.1° Toe Out
Rear:
  -0.3° Camber
  0.2° Toe

For a Street Performance setup, some customers run:
Front:
  -1.0° Camber
  8.0° Caster (+/- 0.5°)
  0.1° Toe Out
Rear:
  -0.5° Camber
  0.05° Toe In

For a Road Course & AutoCross setup, some customers run:
Front:
  Up to -2.5° Camber
  6.5° to 7.5° Caster
  0.25° Toe Out (NOT for street use)
Rear:
  -1.0° Camber
  0.05° Toe In

For a Drag Strip setup, some customers run:
Front:
  1.0° to 1.5° Camber
  6.0° to 7.0° Caster
  0.00° Toe
Rear:
  0.00° Camber
  0.25° Toe


2010+ Camaro Suspension Videos by Phastek: