Home > Camaro Suspension & Handling > Sway Bars & End Links ('10-'18) > Camaro Sway Bar Bushings & Mounts >

BMR End Link Mounting Brace, Rear Lower Control Arm :: 2010-2011 Camaro
2010 2011 Camaro SS & V6 BMR End Link Mounting Brace, Rear Lower Control Arm #ELK009


 
List Price: $54.95
Our Price: $39.95
You save $15.00!


Availability: manufacturer direct

- Product Code -
:
BMR-CAMARO-ENDLINK-ELK009

BMR Color Choice:

Red Powdercoat
Black Hammertone

 
Product Description Installation Instructions
 

2010, 2011 Camaro SS & V6 BMR End Link Mounting Brace, Rear Lower Control Arm #ELK009


The sway bar tabs on the OE control arm have proven to be failure-prone when stiffer aftermarket sway bars are installed. The nature of the design itself along with the thin OE material just cannot withstand the additional loading created from higher rate sway bars. BMR has a simple bolt-in solution that not only resolves this issue but can be installed in 45 minutes or less!

Made from 3/16" laser-cut plate, the design bolts to existing mounting holes in the control arms upper bracing. The BMR End Link Mounting Brace simply slips under the OE mount and mimics the OE shape. This not only spreads the load out over a greater area but also reinforces the mounting hole with an additional 3/16" of plate thickness.

NOTE: On 2012 models, these tabs are only necesarry if you are using a pre-2012 style sway bar.

Simple bolt-on solution
No drilling
No welding
Control arm removal not necessary


Average Customer Review: 5 of 5 Total Reviews: 1   Write a review.

  0 of 0 people found the following review helpful:
 
Another Great Product from BMR July 31, 2016
Reviewer: Scott from Redmond, WA United States  
These braces are the a must for anyone wanting to stiffen the rear anti-roll bar on their FE3 Camaro.  Installation was a breeze and as usual, the fit and finish from BMR means that everything bolts up with no issues.

I have the BMR adjustable front and rear anti-roll bars and before changing to the middle hole in back, I wanted to strengthen the weakest link and the OEM mounting bracket is it.

Here's an install tip!

To hold the new, mounting bolts in place while you position the bracket, use a square piece of duct tape !  Just remove the tape after you get the nuts started!

Was this review helpful to you?


Browse for more products in the same category as this item:

Camaro Suspension & Handling > Sway Bars & End Links ('10-'18) > Camaro Sway Bar Bushings & Mounts
Camaro Suspension & Handling > Sway Bars & End Links ('10-'18)
Suspension & Handling ('10-'13)
Camaro Suspension & Handling > Chassis Braces ('10-'18)
Suspension & Handling ('10-'13) > Springs & Sway Bars ('10-'13)
Parts Categories & Accessories > * Upgrades Under $100 *
Suspension & Handling ('10-'13) > Chassis Strength ('10-'13)
Camaro Suspension & Handling > Hardware & Bushings ('10-'18)
Parts Categories & Accessories > Shop by Brand: Camaro Parts
Parts Categories & Accessories > Shop by Brand: Camaro Parts > BMR Suspension
2010-2013 Camaro Parts