LSA Supercharger Isolator :: Fits 2012-2013 Camaro ZL1
The supercharger isolator is part of the supercharger drive assembly and is located in the supercharger snout. The original isolator as installed at the factory contains a spring mechanism and is notorious for noise and a short service life. #LSA0001
Retail Price: $65.95
SPECIAL SALE PRICE: $53.96
You save $11.99!
Double Bearing Idler Pulley (50mm) :: Fits 2012-2015 Camaro ZL1
We offer this replacement idler pulley in a reduced diameter (2.00") to
provide the necessary clearance for overdrive crank pulley rings. This
idler pulley installs as a direct replacement for the factory
idler located at the 10 o'clock position relative to the crank pulley.
Our pulley even uses the original pulley bolt for installation. #MIPDPR-50
Retail Price: $99.99
SPECIAL SALE PRICE: $80.99
You save $19.00!
LSA Interchangeable Crank Pulley Ring :: Fits 2012-2013 Camaro ZL1
These are the individual crank pulley rings used with the Metco Interchangeable Crank Pulley Kit for the GM LSA engine. If you have a Metco kit installed on your car, you can buy the rings separately for a quick and easy change to the boost level. #MCR0000V
Retail Price: $139.95
SPECIAL SALE PRICE: $107.99
You save $31.96!
Supercharger System Upgrade (630HP) :: Fits 2012-2015 Camaro ZL1
The Lingenfelter 630 HP supercharger pulley upgrade package is designed to enhance the already impressive 6.2 L ZL1 supercharged engine. This package produces a substantial horsepower and torque improvement over the factory 550 horsepower and 550 lbs ft of torque while maintaining a safe level of boost and supercharger RPM. #CAMARO-ZL1-630HP
Retail Price: $999.99
Sale Price: $849.95
You save $150.04!
ZL1 Supercharger Upgrade Package (650HP) :: Fits 2012-2015 Camaro ZL1
This 650 horsepower package was carefully designed by the technicians at Phastek Performance to provide additional power without sacrificing the vehicle's drivability or reliability. Keeping well within safe boost limits will maintain the longevity of your engine. #ZL1-650
Retail Price: $2,195.00
Sale Price: $2,030.65
You save $164.35!
LSA Idler Pulley Relocation Bracket :: Fits 2012-2015 Camaro ZL1
This precision-machined idler relocation bracket is designed specifically for the GM LSA application. The bracket installs as a direct replacement for the original, but moves the Metco 50mm crank idler pulley (bottom) away from the crank pulley to allow for drive rings larger than 9.55". #MRB1000
Retail Price: $129.95
SPECIAL SALE PRICE: $107.99
You save $21.96!
LSA Interchangeable Crank Pulley Kit :: Fits 2012-2013 Camaro ZL1
This crank pulley kit is based on the Innovator's West replacement balancer assembly for the GM LSA engine. This kit represents a clean and simple way to add boost and horsepower to your supercharged Cadillac or Camaro without making any permanent modifications. #ICP-LSA
Retail Price: $775.00
SPECIAL SALE PRICE: $652.50
You save $122.50!
Water-Methanol Injection Stage 2 Boost Cooler :: Fits all 2010-2013 Camaro models
This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. #20010
Retail Price: $663.08
Sale Price: $472.45
You save $190.63!
Water-Methanol Injection Dual Nozzle Upgrade :: Universal Gas Application
These Snow Performance dual nozzle upgrade kits allow you to add an additional nozzle to be mounted in any Snow Performance Boost Cooler kit. They include a tee splitter, a junction piece with quick-connect fittings, a nozzle holder, and a section of hose. The Snow Performance dual nozzle upgrade kits are perfect for applications that need more flow than one nozzle can provide, or to get even distribution for a dual plenum/throttle body/carburetor setup. #4004
Retail Price: $42.95
Sale Price: $37.95
You save $5.00!
Water-Methanol Injection Stage 3 Boost Cooler :: Fits all 2010-2013 Camaro models
The Stage 3 2010-2013 Camaro Boost Cooler® is unmatched for accuracy and adjustability in water-methanol injection systems. This system can be used on any forced induction engine, or ANY engine with a traditional EFI system, and features our LCD display with on-the-fly adjustability. #310
Retail Price: $894.73
Sale Price: $715.78
You save $178.95!