Chevrolet LT2 Intake Manifold 2016-2024 Camaro SS

Features:

• Factory LT2 Intake Manifold
• High Plenum
• Short Runners
• 87mm Throttle Body Bore Size
• OEM Throttle Body Can Be Re-Used
• Modifications REQUIRED to fit on LT1

LT1 Required Modifications:

• This intake will require some modifications to fit correctly on the LT1.
• Removing fins on the bottom backside of intake manifold for proper clearance of LT1 fuel components
• Removing location tab near intake manifold bolt, there will only be 1 location tab on intake
• Drilling, tapping and installing fitting to allow vacuum line to be installed
• Required for installation is a MAP extension harness
• Extending the valley breather hose is required (see installed photos for reference)

From the LT2 engine in the C8 Corvette, this LT2 intake manifold brings new life to your LT1. With a larger plenum allowing for better flow capabilities this intake manifold allows you to bolt on some instant power, after some easy modifications are done.

When switching from the factory LT1 intake manifold to this LT2 manifold, there have been reported gains of 15+rwhp at peak rpm's! Although gains are seen all through the power band this intake has proven to be a cost effective unit when searching for all the power possible.

Note: Modifications to intake are REQUIRED for proper fitment to LT1. A catch can is suggested for installation or extending valley breather is required (see installed photos for reference).

Note: OEM throttle body can be re-used.

REQUIRED Manifold Modifications (opens in new tab): Click HERE

Warranty Information: Once modifications have been performed warranty or any returns are VOID. Please ensure that you or your shop are willing to take on the modifications prior to performing them.

Part Number: 12697714