Features:
- These injectors utilize the latest technology and provide great linearity and short pulse width repeatability.
- Plug and Play GM ECU Data Available at http://fuelinjectorclinic.com/GMData
- Injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set.
- Flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.
- Superior short pulse width control and tight manufacturing tolerances make these injectors easy to tune and provide great drivability.
- Injectors are set up to and include all o-rings needed to fit the factory application.
Fuel Injector Clinic Injector Set: 8 x 1200cc/min (110lbs/hr) at 3 bar (43.5psi) fuel pressure and 130lbs/hr (1350cc/min) at OE 58psi (4 bar) fuel pressure. Saturated / High Impedance Injectors. Includes pigtails PGTJETR8 or add Plug & Play adaptors PADPJtoU8.
This set of injectors requires you to change the injector plug on the wiring harness in your car.
This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.
Part Number: IS303-1200H