Premade Braided Stainless Steel Oil Lines with Durable -AN Fittings
Includes Billet Aluminum Non-Thermostatic Oil Sandwich Plate
25-Row Stacked-Plate Oil Cooler for Optimal Reduction in Fluid Temperature
Increases Oil Capacity by 0.75qt
Sleek Silver Cooler Finish
An engine oil cooler is a great way to maintain optimal oil temperature and provide the best possible protection for the high-power LS3 or L99 engine in your 2010-2015 Camaro SS. Our Mishimoto engineers have gone one step further than the factory liquid-to-liquid setup and came up with a direct-fit liquid-to-air oil cooler kit that mounts behind the front bumper on a bracket designed specifically for your 5th Gen Camaro.
This 25-row stacked-plate oil cooler will take full advantage of all that air flowing through the front end of your car. The cooler is a Sleek Silver finish and comes with pre-assembled stainless steel braided oil lines with durable AN fittings, a non-thermostatic 6061 aluminum CNC-machined oil sandwich plate, custom mounting bracket, and all of the fittings you need for installation - we've thought of everything to make this kit a direct fit.
With a test-proven 35°F temperature drop, you don't have to worry about overheated engine oil even during long periods at full throttle. Rest assured that with the Mishimoto Direct Fit Oil Cooler Kit, you can drive your Camaro the way it was intended to be driven, having confidence that your oil is under control. Additionally, as with any other product we offer, your part is protected by the Mishimoto Lifetime Warranty!
Includes:
(1) Application-Specific Mounting Bracket
(1) 25-Row Oil Cooler in Sleek Silver
(1) 65" Stainless Steel Braided Hose with 90° -10AN Fittings
Note: Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.
Note: It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation.
Installation Video
Installation PDF (opens in new tab): Click HERE Warranty Information PDF (opens in new tab): Click HERE
Features: Reduces Oil Temperatures by Up to 35°F Minimal Pressure Drop Application-Specific Mounting Brackets Premade Braided Stainless Steel Oil Lines with Durable -AN Fittings Includes Billet...
Features: Reduces Oil Temperatures by Up to 35°F Minimal Pressure Drop Application-Specific Mounting Brackets Premade Braided Stainless Steel Oil Lines with Durable -AN Fittings Includes Billet...
Features:
160* thermostat
Tune required for proper engine operation
New seal
No modification required
The RST 160* low-temp thermostat dramatically reduce's operating temperatures,...
2014, 2015 Camaro V8 Transmission Oil Cooler Kit #P-120016A by PCM of NC Have you installed a torque converter? Plan on drag racing your Camaro? We have a drop in/ plug and play transmission...
Features: All-Aluminum Radiator Provides a 35°F Temperature Drop When Compared to Stock TIG-Welded to Perfection with a Fully Brazed Aluminum Core 0.25 Gal of Additional Fluid Capacity Core...
Features: Full Aluminum Construction with Durable, TIG-Welded End Tanks Two-Row, 2.20" Thick Brazed Aluminum Core, Providing Ideal Fluid Temperatures 0.5 gal of Additional Fluid Capacity Lowers...
FAST LSXR 102mm Standard Intake Manifold *Fits: 2010-2015 Camaro SS FAST engineers teamed up with airflow specialists at RHS to develop a polymer intake manifold for rectangular port GM LS3/L99...
Features: Front Entry W175ax Whipple Twin-Screw Supercharger Integrated Casting to Minimize Bolt-On Pieces, Adapters, Leaks and Flow Festrictions Integrated Crusher inlet for Maximum Airflow...