Provides Max Gains of 18 WHP / 22 WTQ While Maintaining Safe A/F Ratios
Wire-Reinforced Silicone Elbow Eliminates Restrictions and Improves and Increases Airflow Capacity
Extremely Aggressive Intake Tone Under Acceleration
Heat-Resistant, Glass-Reinforced Nylon MAF Sensor Housing and Integrated Air Straightener Molded by Plastic Injection
Powder-Coated Black Airbox Keeps Unwanted Hot Air from Entering the Air Filter
Mishimoto High-Flow Oiled Air Filter Receives Maximum Airflow from the Front of the Vehicle
No Tune Required
Mishimoto Lifetime Warranty
The engineers at Mishimoto have put a lot of R&D hours into the Mishimoto Performance Intake for the 2016+ Chevy Camaro 2.0T. Several designs were planned and tested, but this one will truly wake up your LGT motor with the help of extra air surging through your system.
This kit fits all two-liter 2016+ Camaros and will provide dyno proven performance gains of 18 hp and 22 ft-lbs of torque. They also improved pressure drop by 21%, giving you increased airflow over stock. The airbox is made of steel and powder-coated black to help fight air intake temperatures, while the MAF housing is made of a glass-reinforced, plastic-injected mold with a built-in air straightener. The intake elbow is made of a five-ply silicone with steel wire reinforcement to prevent misshaping under vacuum and keep the engine heat at bay.
The silicone design is an improvement over the bulky plastic intake elbow, replacing the stock sound suppression chamber attached to the turbo and giving you smoother airflow throughout. Hundreds of miles of road testing was performed to ensure the safety of running it on a completely stock motor, so no tune is required!
Includes:
(1) Silicone Intake Elbow - Black
(1) Plastic Injection Molded MAF Sensor Housing
(1) High-Flow, Oiled Filter
(1) Steel Airbox
(3) Worm Gear Clamps
Mounting Hardware
Pipe Material - Steel Reinforced Silicone Airbox Material - Steel, Black Powder Coat Heat Shield Material - Steel Oiled Filter - 38g of oil on filter
Note: 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M)
Installation Video
Emissions Disclaimer: NOT CARB legal and CANNOT ship to California.
Features: Dyno-Proven Gains up to +24 HP & +25 Lbs. x Ft. TQ Outflows Factory Intake by 21% One-Piece Roto-Molded Sealed Housing w/ Auxiliary Air Inlet Built-In Sight Window Provides Easy...
Features: Box Type: Open Box Filter Type: Oiled Filter Color: Red Tube Material: Plastic Tube Color: Black Tune Required: No The K&N air intake system for the Chevrolet Camaro 2.0T, replaces...
Mishimoto Performance Cold Air Intake, Blue Box Type: Open Box Filter Type: Oiled Filter Color: Red Tube Material:Silicone Tube Color: Blue Tune Required: No Provides Max Gains of 18 WHP / 22 WTQ...
Mishimoto Performance Cold Air Intake, Red Box Type: Open Box Filter Type: Oiled Filter Color: Red Tube Material: Silicone Tube Color: Red Tune Required: No Provides Max Gains of 18 WHP / 22 WTQ...
Features: Box Type: Open Box Filter Type: Oiled Filter Color: Red Tube Material: Silicone Tube Color: Red Tune Required: No Provides Max Gains of 14 WHP / 14 WTQ while Maintaining Safe A/F Ratios...
Features: Box Type: Open Box Filter Type: Oiled Filter Color: Red Tube Material: Plastic Tube Color: Black Tune Required: No The K&N air intake system for the Chevrolet Camaro 2.0T, replaces...
Features: 7psi Actuator Stable Boost Control and Improved Boost Response Flatter Boost Curve in the Top End Proprietary Silicon Nomex Diaphragm High Grade Billet Aluminum Construction...
Mishimoto Performance Cold Air Intake, Red Box Type: Open Box Filter Type: Oiled Filter Color: Red Tube Material: Silicone Tube Color: Red Tune Required: No Provides Max Gains of 18 WHP / 22 WTQ...
Features: Dyno-Proven Gains up to +24 HP & +25 Lbs. x Ft. TQ One-Piece Roto-Molded Intake Tube w/ Resonance Chamber Built-In Sight Window Provides Easy Inspection of Filter Without...
Features: Plumb Back Valve Billet Aluminum Construction with Hi-Temp O-Rings Integrated Proprietary Hi-Temp Solenoid Valve True Plug & Play Easy Installation Complete Unit Replacement Patented...
Features: Dual Port Valve Billet Aluminum Construction with Hi-Temp O-Rings Integrated Proprietary Hi-Temp Solenoid Valve True Plug & Play Easy Installation Complete Unit Replacement Patented...
Mishimoto 3" Stainless Steel Pro Cat-Back Exhaust, 4.5" Dual Black Tips System Type: Axle-Back Tip Size: 4.5 Inch Tip Finish: Black Tip Quantity: Dual System Material: T304 Stainless Steel Pipe...
Mishimoto Performance Cold Air Intake, Blue Box Type: Open Box Filter Type: Oiled Filter Color: Red Tube Material:Silicone Tube Color: Blue Tune Required: No Provides Max Gains of 18 WHP / 22 WTQ...
Features: Box Type: Open Box Filter Type: Dry Filter Color: Blue Tube Material: Aluminum Tube Color: Polished Tune Required: No This Power Flow Intake is constructed out of 6061-T6 aluminum then...