MRR M228 - Z28 Style Wheels, Brushed Finish, 20x10 & 20x11 2010-2023 Camaro
- Order Now Ships in 1-2 weeks
- Model: M228
- Wheel Finish: Brushed
- Wheel Diameter: 20"
- Wheel Width: Front 10" & Rear 11"
- Wheel Offset: Front +23 & Rear +43
- Wheel Backspacing: Front 6.41" & Rear 7.69"
- Hub Centric: Yes
- Hub Bore: 66.9mm
- Bolt Pattern: 5x120
- Wheel Material: Cast
- TPMS Compatible: Yes
- Clears Factory Calipers, No Spacers Required
- Staggared Setup
- Light Weight
- Sold as a Set of 4
Recommended Tire Size:
- Front 20x10 Wheel - 275/35
- Rear 20x11 Wheel - 305/35
MRR Designs has created this wheel to Replicate the 2014-2015 Camaro Z/28 Factory Wheels. The 20 inch staggered M228 is manufactured exclusively for all Camaro models in sizes 20x10 (front) and 20x11 (rear). To insure proper fitment, these wheels are manufactured to not only accept the original equipment TPMS sensor and center cap, but are also hub-centric to the Camaro to prevent any vibrations.
Note: The Factory lug nuts are NOT compatible with these wheels, smaller Acorn style lug nuts are required.
Note: Brushed wheels do not come with matching caps, MRR is not able to apply brushed look to plastic caps.
Note: Due to the location of the air valve, if you have the Factory brake pads with the counter-weights sticking out, Schrader 34000 Valve Stems will be REQUIRED.
Note: Tire recommendation above should be verified by installer for correct fitment on your specific year and model prior to mounting tire on wheel. Any suspension modifications can alter the wheel/tire fitment.
Note: Once the wheels have been mounted with tires, they are no longer returnable. Warranty replacements are available for any defects that fall under warranty coverage.
Front 20x10 +23 Wheel - M22820A052023BF
Rear 20x11 +43 Wheel - M22820A152043BF