Home > Camaro Suspension & Handling >

BMR 1" Drop Lowering Springs (Set of 4) :: 2010-2015 Camaro V8 Coupe
2010-2015 Camaro SS BMR Lowering Spring Kit, Set Of 4, 1.0" Drop #SP019


 
List Price: $283.45
Our Price: $269.95
You save $13.50!


Availability: In-Stock and Ready to Ship

- Product Code -
:
BMR-CAMARO-SPRINGS-SP019

Product Description Installation Instructions
 

BMR Camaro SS Lowering Spring Kit, Set Of 4, 1.0" Drop #SP019

* Fits 2010-2015 Camaro V8 Coupe Models (SS, 1LE, ZL1) - DOES NOT FIT Convertible models

2015 Redesign:
The SP019R product has been redesigned. The top coil of the front spring has been altered to better allow the strut mount to sit on the front spring. The spring rate and the drop distance remain the same.

Lowering the center of gravity not only provides visual appeal, it also dramatically improves the handling ability of your Camaro. BMR lowering springs are specifically designed to provide optimal handling without sacrificing ride quality. Our extensive development time produced what we feel to be the optimal rates for this application. By using a 220 lb/in front spring and a 460 lb/in rear spring the car responds with a firm yet comfortable ride with much improved handling characteristics.

All BMR springs are cold wound from high-tensile chrome silicon wire, stress relieved, compressed for permanent set then shot peened and computer tested. Some of these procedures are overkill but it ensures a long, trouble-free life with consistent rates and ride heights. Because of these features, BMR is able to offer a lifetime warranty against spring sag.

NOTE:

V8 Model Only
Not recommended for convertibles.

Features:

Lowers vehicle 1" front and 1" rear.

Made in USA

Lifetime Warranty against spring sag.





Camaro BMR Lowering Springs SP019


Full Product Description:
There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 2010 and newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.

Blending aesthetics and performance, BMR has designed the SP019 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your V-8-equipped 2010 and newer Camaro 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension!

BMR Suspension’s SP019 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.


Main Features of these BMR Lowering Springs for your 5th-Gen Camaro:
  • Lowers your V-8-equipped 2010 and newer Camaro 1-inch
  • Improves handling and ride quality
  • 220 lb/in front, 460 lb/in rear spring rate
  • Manufactured from chrome silicon high-tensile spring wire
  • Cold wound on a CNC Coiling Machine to exact specifications
  • Lifetime warranty against spring sag
  • Stress-relieved at 750 degrees F
  • Shot-peened
  • Computer tested for accurate height and spring rate
  • Fits V8 Models Only
  • Not recommended for convertibles
  • Made in the U.S.A.


  • SP019R
    Description: Lowering spring kit, set of 4, 1.0" drop
    Application: 2010-2015 Camaro (SS only)
    Retail Price: 249.95
    Tier 4 WD Price: 187.46
    Box Dimensions: 12" x 12” x 12”
    Shipping Weight: 26 pounds
    Department: Chassis & Suspension
    Section: Suspension Components
    Part Type: Lowering Springs
    Brand: BMR Suspension
    Spring Position: Front and rear
    Spring Type: Coil
    Progressive Rate Spring, Front: Yes
    Spring Rate, Front (lbs/in): 220
    Drop, Front: 1.0"
    Progressive Rate Spring, Rear: Yes
    Spring Rate, Rear (lbs/in): 460
    Drop, Rear: 1.0"
    Bushings Included: No
    Spring Finish: Red powdercoated
    Quantity: Sold as a set of 4

    * Aftermarket Camaro Part - New In Box *


    Average Customer Review: 5 of 5 Total Reviews: 11   Write a review.

      0 of 0 people found the following review helpful:
     
    Great product my 1le rides better than stock May 10, 2019
    Reviewer: colin kittleson from Layton, UT United States  
    No more bouncing rear end in bumps and corners. Feels great with 1le struts. Smoother than stock, amazing ride quality. I still need to get an alignment done but feels good in the corners

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Great product. October 24, 2018
    Reviewer: Harrison Brethouwer from LOS ANGELES, CA United States  
    Took a month to receive these because of BMR (not Phastek’s fault) but when I put them on I was amazed. I have a 1LE so the ride is a little less stiff but it looks amazing the 1” drop is perfect for those not looking to worry about bottoming out. Would definitely buy again.

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    Great love them August 22, 2018
    Reviewer: Tracy Jewett from Cheshire, CT United States  
    Great love them

    Was this review helpful to you?

      0 of 0 people found the following review helpful:
     
    April 6, 2018
    Reviewer: Kyle Beauchamp-Lalonde from Ogdensburg, NY United States  
    Perfect can’t complain

    Was this review helpful to you?

      2 of 2 people found the following review helpful:
     
    BMR lowering springs February 15, 2018
    Reviewer: Andrew Armstrong from Salem , OR United States  
    I got the one inch lowering springs because I have the zl1 wheels from Phastek as well.. they told me an inch is how low I can go without rubbing.. spot on. Great ride quality. Feels lowered. Looks lowered, rides like stock without rubbing at all!

    Was this review helpful to you?

    View All Customer Reviews

    Browse for more products in the same category as this item:

    Camaro Suspension & Handling
    Suspension & Handling ('10-'13) > Lowering Springs ('10-'13)
    Parts Categories & Accessories > Shop by Brand: Camaro Parts
    Suspension & Handling ('10-'13) > Springs & Sway Bars ('10-'13)
    Suspension & Handling ('10-'13)
    Parts Categories & Accessories > Shop by Brand: Camaro Parts > BMR Suspension
    2010-2013 Camaro Parts
    Shop by Year > 2014-2015 Camaro Parts (all models)
    Suspension & Handling ('14-'15)
    Suspension & Handling ('14-'15) > Lowering Springs ('14-'15)
    Suspension & Handling ('10-'13) > Lowering Springs ('10-'13) > Shop All BMR Springs
    Camaro Suspension & Handling > Coilovers & Springs ('10-'18)
    Parts Categories & Accessories > Most Popular Camaro Parts!