COMP Cams XFI AFM Hydraulic Roller Camshaft, 212/224 D, 210/222N 2016-2024 Camaro SS

Comp Cams XFI AFM Hydraulic Roller Camshaft, 212/224 D, 210/222 N

*Fits: 2016-2021 Camaro SS

Revolutionary GM Gen V Camshafts from COMP Cams are designed to work with the direct injection, VVT (Variable Valve Timing) and AFM (Active Fuel Management) lifters featured in GM’s Gen V LT1 V8 engine. This means that these XFI series hydraulic roller cams allow users to leverage the OE technology for performance gains. Gen V Cams feature four different lobe profiles to both create AFM compatibility and optimize intake and exhaust valve opening/closing events. COMP Cams GM Gen V Camshafts increase torque and horsepower throughout the entire RPM range, while providing excellent responsiveness and mid-range power over stock for across-the-board gains.

Features:

• Increase Horsepower and Torque throughout the RPM Range
• Enhance Durability and Reduce Load Loss
• Smooth Idle
• Dyno-Tested Combinations that Ensure Max Power
• High Quality and Durable Billet Steel Construction

These cams must have the COMP Phaser Limiter Kit (Part #5456), which limits the range of camshaft movement from 62 to 22 crank degrees thus requiring PCM tuning. COMP Cams GM Gen V Camshafts are available for stock to highly modified applications.

Grind Number:	262PIIHR15
RPM Operating Range:	1,400-6,500
Cam Type:	Hydraulic Roller
Lifter Style:	Hydraulic Roller
Camshaft Series:	XFI AFM
Camshaft Gear Attachment:	1-Bolt
Usage:	Street / Performance
Camshaft Material:	Billet Steel
Advertised Intake Duration Deactivation Cylinders:	274
Advertised Exhaust Duration Deactivation Cylinders:	286
Advertised Intake Duration Non-Deactivation Cylinders:	262
Advertised Exhaust Duration Non-Deactivation Cylinders:	274
Intake Duration at .050" Lift Deactivantion Cylinders:	212
Exhaust Duration at .050" Lift Deactivantion Cylinders:	224
Intake Duration at .050" Lift Non-Deactivantion Cylinders:	210
Exhaust Duration at .050" Lift Non-Deactivantion Cylinders:	222
Intake Valve Lift Deactivation Cylinders:	0.572"
Exhaust Valve Lift Deactivation Cylinders:	0.529"
Intake Valve Lift Non-Deactivation Cylinders:	0.572"
Exhaust Valve Lift Non-Deactivation Cylinders:	0.529"
Lobe Separation:	115

Note: Requires Cam Phaser Limiter (#5456) for proper operation and installation. Fits on models with variable valve timing (VVT) or active fuel management (AFM). Tuning is required to ensure proper air/fuel ratios.


Required Upgrades

• Cam Phaser Limiter - #5456

Suggested Component Upgrades:

• Trunnion Upgrade
• Valve Springs

Warranty Information (opens in new tab): Click HERE

Part Number: 624-500-13