ReadyLIFT 7" Lift Kit 2016-2018 Silverado 1500 w/ Stamped Steel Front Suspension

Features:

• Fits with OE Stamped Steel front suspension
• Allows for up to a 35" tall off road tire
• Requires at least a 9 inch wide wheel with -12 offset
• Retains factory turning radius, ride and handling
• Works with Front MagneRide
• Includes premium Bilstein shocks
• Includes new tubular steel upper control arms with TCT pivot bushings

ReadyLIFT is excited to now offer a brand new 7 inch big lift kit for 2014-2018 Chevrolet Silverado 1500 trucks. This lift system will work with trucks equipped with or without MagneRide. The 7 inch lift kit is designed for use on 2014-2018 Chevrolet Silverado 1500 trucks equipped with the factory Stamped Steel front suspension and includes new tubular upper control arms.


Some of the great features their 7 inch lift kit includes retaining the factory turning radius while minimizing track width increase to less than 0.5" per side. This kit will allow for up to a 35" tall tire on a 9 inch wide wheel with -12 offset. Our new "clam-shell" style lower strut extension retains use of the factory struts (both standard and MagneRide) and does not require strut rotation. These new clam-shell brackets utilizes our TCT lower bushings to provide a precise pivot point that maintains the factory ride. The addition of our proprietary new tubular upper control arms with TCT pivot bushings.ensures prolonged upper control arm strength which is far superior to the OE stamped steel control arms.

Boxed steel front/rear cross members and full width front skid plate are constructed of thick 3/16" plate steel while also allowing for use of the OE front plastic gravel guard to protect the engine bay and retain the proper air flow as intended by the GM designers. New 1/4-inch boxed plate steel differential drop brackets feature a double gusset and boxed center rib to take the abuse of front differential torsional twisting. (Not for use on AWD applications - 2WD or 4WD only).

Rear lift is achieved with fabricated 3/16-inch thick plate steel rear lift blocks that include built-in bump stop landings and an offset pin design to properly center the axle and specific angles to the blocks to retain the proper pinion angle. This new lift system includes premium extended length Bilstein rear shocks.


Note: Not for use on AWD applications - 2WD or 4WD only. Max tire - 35x12.50 on 9 inch wide wheel with -12 offset (tire tread varies - some aggressive tires may require minor trimming)

What control arms does your truck have (opens in new tab): Click HERE to learn more.

Installation PDF (opens in new tab): Click HERE

Warranty Information (opens in new tab): Click HERE

Part Number: 44-3472