Vararam Power Wedge for Throttle Bodies :: 2010-2013 Camaro SS
|
|
ZL1 Big Gulp Adjustable Air Duct #10165014 :: 2012-2013 Camaro ZL1
|
|
Vararam VR DZ-6 Ram Air Induction System (Gains of 25-30 hp) #DZ-6 :: 2010-2011 Camaro V6
|
|
|
|
|
|
|
|
The Power wedge was born from the VRX Intake manifold program. Our research showed that most of the OEM manifolds had the intake manifold neck pointed upward at about 8 degrees. This is done in order to clear the water pumps and to soften throttle tip in response. In this position , at wide open throttle the blade extends into the manifold neck and plenum up to 1 full inch downward angle position. This blocks a portion of the lower section of the flow path. Get the flow back!
|
The Big Gulp is a custom molded adjustable duct designed to be a direct bolt-in replacement for the front left factory brake cooling duct.
|
The V-6 Camaro unit is unique in that it is designed around the V-6 engines cross ram
intake manifold flow architecture and its need for maximum plenum volume.
|
|
|
|
Vararam Camaro VR Ram Air Induction System #Super Street :: 2010-2011 Camaro SS
|
|
Phastek ZL1 Cold Air Intake by Roto-Fab :: 2012-2013 Camaro ZL1
|
|
Phastek Stage 1 Power Kit (Cold Air Intake + Programmer) :: 2010-2012 Camaro SS
|
|
|
|
|
|
|
|
Unleash the power of your Camaro SS! This is the most powerful induction system of any kind for the new 2010-2011 Camaro SS.
|
The Roto-Fab air intake system for the ZL1 features a new air box design, MAF housing and inlet elbow unique to the ZL1. The air filter itself is the same one they use with our other Camaro intake systems. Like their previous systems, no modifications to the vehicle or its components is required. Further, NO TUNE REQUIRED!
|
Unleash the hidden power of your Camaro SS with our Phastek Stage 1 Power Kit! 25+HP gains.
|
|
|
|
Cold Air Inductions Intake System (Black or Chrome) :: 2010-2011 Camaro V6
|
|
Cold Air Inductions Intake System (Chrome or Black) :: 2012-2013 Camaro V6
|
|
Cold Air Inductions (CAI) Intake System (Chrome or Black) :: 2010-2013 Camaro SS
|
|
|
|
|
|
|
|
Maximize your Camaro's performance with our high performance air intake system. Our intakes surpass our competitors with superior quality and craftsmanship while achieving outstanding performance gains. We see on average, a 16 rwhp increase on otherwise stock 3.6l's.
|
Maximize your Camaro's performance with our high performance air intake system. Our intakes surpass our competitors with superior quality and craftsmanship while achieving outstanding performance gains. We see on average, a 16 rwhp increase on otherwise stock 3.6l's.
|
Maximize your Camaro's performance with our high performance air intake system. Our intakes surpass our competitors with superior quality and craftsmanship while achieving outstanding performance gains. We see on average, a 15 rwhp increase on otherwise stock 6.2L's.
|
|
|
|
Cold Air Inductions Intake System for Magunuson or Whipple Equipped Cars (Chrome or Black) :: 2010-2013 Camaro SS
|
|
JET Mass Air Flow Sensor Upgrade #69180 :: 2012-2013 Camaro V6/LS/LT
|
|
Volant Cold Air Intake Kit (With Donaldson's PowerCore Filter™ #415036 :: 2010-2011 Camaro V6
|
|
|
|
|
|
|
|
Do you have a Magnuson or Whipple Supercharger installed on your Camaro? Let your Supercharger reach higher performance levels by coupling it with a Cold Air Inductions Inc. Intake system! Maximize your Camaro's performance with our high performance air intake system. Our intakes surpass our competitors with superior quality and craftsmanship while achieving outstanding performance gains. We see on average, a 24 rwhp increase on otherwise stock 6.2L's
|
The JET Powr-Flo Mass Air Sensor delivers improved horsepower, torque and mileage by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. +ADD RWHP!
|
This intake has once again put Volant in the forefront. The smooth transition and diameter of the air duct has allowed the car to flourish. The air volume in the air box and adding our new oval powercore air filter gives you the protection and gratification in the additional horsepower.
|
|
|
|
Airaid MXP Cold Air Intake System (non-oiled, SynthaMax) #250-308 :: 2012-2013 Camaro ZL1
|
|
Airaid MXP Cold Air Intake System (oiled, SynthaFlow) #251-308 :: 2012-2013 Camaro ZL1
|
|
K&N Drycharger Air Filter Wrap (Black) #RF-1042DK :: 2010-2013 Camaro
|
|
|
|
|
|
|
|
AIRAID MXP Series Cold Air Intake is now available for the 2012 Supercharged Chevrolet Camaro ZL1 6.2L. The new intake features a large one-piece roto-molded air box that utilizes the OEM scoop, a massive 4.25" induction tube with a Billet Aluminum MAF Housing, 1400-CFM AIRAID Premium filter, complete high grade hardware and detailed step by step installation instructions. The Supercharged ZL1 AIRAID Intake system will require the use of Aftermarket Tuning.
|
AIRAID MXP Series Cold Air Intake is now available for the 2012 Supercharged Chevrolet Camaro ZL1 6.2L. The new intake features a large one-piece roto-molded air box that utilizes the OEM scoop, a massive 4.25" induction tube with a Billet Aluminum MAF Housing, 1400-CFM AIRAID Premium filter, complete high grade hardware and detailed step by step installation instructions. The Supercharged ZL1 AIRAID Intake system will require the use of Aftermarket Tuning.
|
DryCharger® - K&N DryChargers® are manufactured from a durable polyester material and are pre-treated with a proprietary hydrophobic process designed to prevent splashes of water or mud from saturating your K&N air filter. The DryCharger will also stop small dirt particles; yet add little restriction to the airflow of the filter.
|
|
|
|
K&N Typhoon Air Intake Systems #69-4523TP :: 2012-2013 Camaro V6
|
|
JET Mass Air Flow Sensor Upgrade #69126 - 2010-2011 Camaro V6/LS/LT
|
|
Injen Power-Flow Short Ram Cold Air Intake #PF7013WB :: Black :: 2012-2013 Camaro V6
|
|
|
|
|
|
|
|
Estimated Horsepower Gain: 15.63 HP @ 5800 RPM 2012+ Camaro K&N Cold Air Intake #69-4523TP. Built for performance and show, the 69 Series Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Typhoon intake tubes have a high quality finish that's made to last. K&N intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction resulting in additional power and torque.
|
The JET Powr-Flo Mass Air Sensor delivers improved horsepower, torque and mileage by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. +ADD RWHP!
|
2012 Camaro V6 3.6L Tuned air intake system w/ MR Tech., Air Fusion, enclosed air box & web nano-fiber dry Filter - WRINKLE BLACK
|
|
|
|
Airaid Cold Air Intake (SynthaFlow, Oiled) #250-243 :: 2010-2013 Camaro SS
|
|
aFe MagnumFORCE Stage-2 Pro 5R Cold Air Intake :: 2010-2013 Camaro SS
|
|
Volant Cold Air Intake #415062 :: 2010-2013 Camaro SS
|
|
|
|
|
|
|
|
#250-243 - High Flow Washable & Reusable Air Filter, Massive 4" Modular Intake Tube, Easy Bolt-On Installation, Exclusive Lifetime "No-Hassle" Warranty, Add +16HP & +13 Ft.lbs/Torque over the factory Air Induction System! 250-243
|
The Stage 2 air intake system for the 2010+ Chevy Camaro produces 10 max horsepower and 12lbs. per ft. torque while outflowing the factory intake by 35%. Fully enclosed in a heat-shielding molded plastic housing; this air intake system features a Pro 5R washable/reusable conical air filter that improves airflow for increased horsepower and torque.
|
Volant's 2010 Camaro Cold Air Kit protects the filter from pulling hot air from the engine. Smooth, larger diameter air ducts provide awesome throttle response. Oil-free filter is efficient and optimizes airflow throughout the intake system
|
|
|
|
K&N 63 Series AirCharger Intake Kit #63-3074 :: 2010-2013 Camaro SS
|
|
Airaid Cold Air Intake Air Dam (non-oiled, SynthaMax) #251-243 :: 2010-2013 Camaro SS
|
|
AEM Intake System #21-8029C :: 2010-2013 Camaro SS
|
|
|
|
|
|
|
|
18.62 HP @ 5161 RPM, 18.95lb/ft TQ @ 5161 RPM - Our 63 Series kits are truly state-of-the-art. We start with the largest conical shaped High-Flow air filter we can fit into the engine compartment while using factory holes and mounting points.
|
#251-243 - High Flow Washable & Reusable Air Filter, Massive 4" Modular Intake Tube, Easy Bolt-On Installation, Exclusive Lifetime "No-Hassle" Warranty, Add +16HP & +13 Ft.lbs/Torque over the factory Air Induction System! 251-243
|
AEM Intake System #21-8029C 2010+ Camaro SS - Add 16.53 HP @ 4200 RPM AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an oversized AEM Dryflow synthetic washable air filter for optimum air flow, filtration, and performance while allowing easy oil-free cleaning.
|
|
|
1,000's of Aftermarket Camaro Parts & Accessories
Performance and Styling Parts
Professional Installations and Dyno Tuning at Phastek
Professional Installations 
Lighting Installations 
Performance Upgrades 
Chassis Dyno Tuning 
