2014-2015 Camaro Performance Upgrades

Remove the annoying first-to-fourth "skip-shift" transmission lockout in the 6-speed Camaro. This PLUG-N-PLAY harness requires no additional mods. #SKIPSHIFT-ELIMINATOR

(69)

High Performance Air Intake System. Superior quality and craftsmanship while achieving outstanding performance gains. Average +15 RWHP increase on stock LS3's. #501-1099-10B

(57)

Maximize your Camaro's performance with CAI's high performance air intake system. Superior quality and craftsmanship while achieving outstanding performance gains. Average +15 RWHP increase on stock Camaros. #501-1099-10

(43)

Choose from 6 color options.
This catch can traps oil before entering intake, improves fuel economy & performance, and eliminates detonation from oil in the cylinder. #BC-175

(38)

Maximize your Camaro's performance with our high performance air intake system. Our intakes surpass our competitors with superior quality and craftsmanship while achieving outstanding performance gains. We see on average, a 16 rwhp increase on otherwise stock 3.6l's. 501-1036-12B

(38)

18.62 HP @ 5161 RPM, 18.95lb/ft TQ @ 5161 RPM - Our 63 Series kits are truly state-of-the-art. We start with the largest conical shaped High-Flow air filter we can fit into the engine compartment while using factory holes and mounting points. #63-3074

(39)

Options available The Roto-Fab air intake system for the ZL1 features a new air box design, MAF housing and inlet elbow unique to the ZL1. Not CARB legal. Not for sale or street use in CA. #ROTOFAB-ZL1-COLDAIRINTAKE

(31)

Options available Roto-fab's Camaro CAI for your V8 equipped Camaro. *Air Box custom made to keep engine/radiator heat away from your filter. *Molded air box adapter tube incorporates the MAF (mass air flow) sensor. Not CARB legal. Not for sale or street use in CA. #10161005

(33)

Maximize your Camaro's performance with our high performance air intake system. Our intakes surpass our competitors with superior quality and craftsmanship while achieving outstanding performance gains. We see on average, a 16 rwhp increase on otherwise stock 3.6l's. 501-1036-12

(28)

18.12 HP @ 5200 RPM - Built for performance and show, the 69 Series Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit your new 5th gen Chevrolet Camaro! #69-4519TP

(26)

A must for the performance minded individual: High quality 304L stainless steel, CNC mandrel bent with 3/8" thick flanges. Easily bolt-on to the factory connection point. Available with high-flow catalytic converters or off-road pipes (converter-delete). #SPCA11HDR

(29)

Improved horsepower, torque and mileage by simply replacing the stock mass air sensor? JETS flow bench tested design of this Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. +ADD RWHP! #69143

(23)

Version 2.0 Axle-Back for V6 Camaro offers a tasteful performance sound. (sounds smoother, deeper and slightly quieter at idle than Version 1.0). #91A177

(24)

Custom V6 Tuning!! Simply the Best and Most Advanced Engine & Transmission Tuning Option available for 5th Gen V6 Camaros. Includes Custom Tuning file and EZ Flash software, plus USB/OBD2 cable. #TUNE-V6

(23)

Switch you Camaro's exhaust from MILD (exhaust ports closed) to WILD (exhaust ports open) using your OEM Homelink! (found on your visor) or via the supplied wireless remote. #MTW-ZL1

(21)

Mishimoto Baffled Oil Catch Can for your V8 2010-2015 Camaro

Options available Roto-fab's CAI for your V6 equipped Camaro. *Air Box custom made to keep engine/radiator heat away from your filter. *Molded air box adapter tube incorporates the MAF (mass air flow) sensor.Not CARB legal. Not for sale or street use in CA. #10151017

(18)

Cold Air Induction Recharge Kit. Keep your CAI Air Filter looking New and Increase the Life of your Filter with the CAI Recharge Kit

(1)

160º Low-temp thermostats dramatically reduce operating temperatures, while increasing thermal efficiency and your engine's performance in the process. Allows coolant to circulate at lower engine temperatures, keeping the engine cooler. #100229

(15)

Add 20+ RWHP with a direct-bolt on! JBA Mid-pipes (NON-CATTED, Cat-Delete/Off-Road pipes). These systems open up the flow on exhaust systems for a dramatic increase in performance and improved sound. Direct bolt-on. Works well with Shorty Headers. #1812SY

(15)

These Moroso air/oil separator tanks can be used as remote separators and filters on vacuum pump systems. They are manufactured from aluminum and feature a natural finish with a Moroso decal. #85487

(15)

K&N Blackhawk Induction air intake system. Black powder coated intake tube with a welded K&N engraved plate. Reusable K&N Dryflow Air Filter for excellent airflow. #71-4519

(13)

Add Unmatched Performance with our custom Cold Air Intake Scoop Add-On & Upgrade! Redirects incoming air from the lower grille into your aftermarket cold air intake.

(12)

The Injen Short Ram Intake System is a traditional, underhood intake system that is placed in the stock location of the factory airbox system. #PF7013P

(10)

Improved horsepower, torque and mileage by simply replacing the restrictive stock mass air sensor. Less Restriction in the Air Flow and increases the full potential of aftermarket cold air intake systems. Provides airflow increases of up to 45% and installs in 10 minutes or less. +ADD RWHP! #69180

(10)

American Racing Headers Long Tube Headers - 1-7/8" (SHORT SYSTEM: Headers & Cats/Cat-Deletes (no mufflers)) With or Without Cats. #CA78SH

(9)

This is a great programmer to help increase your Horsepower and Torque, as well as improve throttle response and other parameters. #7416

(10)

Airaid Throttle Body Spacer 2010 Camaro V6 PowerAid® Throttle Body Spacer; Easy To Install w/Basic Hand Tools; Fits: CADILLAC CTS 2008-2010 V6 3.6L, V6 3.0L CHEVROLET CAMARO 2010-2010 V6 3.6L. #200-630-1

(7)

BBK Long Tube Header System 2010 Camaro SS Complete Bolt On - Chrome, Silver Ceramic or 304 Stainless - with or without cats. Complete Bolt On Performance. #4021, 40210, 40215, 4031, 40310, 40315

(8)

The Power wedge was born from the VRX Intake manifold program. Our research showed that most of the OEM manifolds had the intake manifold neck pointed upward at about 8 degrees. #LS3-POWER-WEDGE

(7)

Version 1.0 Axle-Back for V6 Camaro sounds louder and more aggressive at idle than the 2.0 Version. #91A176

(7)

Add 20+ RWHP with a direct-bolt on! Fits 2010-2015 SS, 1LE & ZL1. Get a dramatic increase in performance and improved sound. Direct bolt-on to your stock exhaust or as an addition to existing aftermarket shorty header. #1812SYC

(6)

Airaid Throttle Body Spacer 2010+ Camaro SS PowerAid®; Throttle Body Spacer; Easy To Install w/Basic Hand Tools. #250-634

(8)

Solo Performance is proud to announce that we have our 2012-2015 Camaro V6 Ultra High Flow Converters ready for sale. These converter assemblies were no easy task as we had to get special tooling and flanges made for their production. The 200 cell ultra high flow converters used in this application offer maximum flow and are rated to 6.0L per side. That’s 12.0L of cleaning ability for your Camaro. #C23926/C23925

(7)

When upgrading the performance of your new SS Camaro, you will want to upgrade your ignition wires to a set of JBA PowerCables™. JBA's performance ignition wires feature ultra-low resistance wire-wound mag conductors that allow more spark energy to reach the spark plug without electronic interference. #W0812

(6)

#22502600 (replaces #6512) + Options - Kooks 2" Long Tube Headers - 2010, 2011, 2012 Camaro - V8 6.2L LS3/L99. 6512 - 2" tubes into 3" merge collectors. Comes with O2 Extension Harnesses (1 pair, 8"). Fits all 2010-2015 Camaro V8 models #22502600

(5)

Add Performance to your Camaro with the Phastek Performance Cold Air Intake Scoop. This scoop is designed to redirect the incoming air from your lower Camaro grille to your aftermarket cold air intake giving you better air flow at driving speeds.

(5)

K&N has released a replacement air filter (33-2434) for the 2010-2015 Chevy Camaro for both the 3.6 liter V6 and the 6.2 liter V8 engines. This air filter drops directly into your factory air box and is backed by K&N’s Original Million Mile Limited Warranty. The 2010+ Camaro K&N filter is designed to increase acceleration without sacrificing performance. K&N replacement air filters employ an oiled cotton media making them washable and reusable. #33-2434

(4)

Extra thick 3/8" CNC laser-cut flanges ensure a tight seal and trouble free performance without leaks from warping. Each kit comes complete with quality hardware gaskets, custom length ignition wire and instructions for a complete installation. #1812SJT

(5)

Custom mail-order Engine Tuning services for your 2010-2012 Camaro SS LS3 with Manual 6-Speed Transmission - no dyno needed!! Get the maximum horsepower from your Camaro with our custom vehicle-specific tune files, tuned to your exact vehicle from YOUR specific list of modifications #CAMARO-CUSTOM-TUNE

(6)

American Racing Headers Long Tube Headers.
1-3/4", 1-7/8", 2".  LONG SYSTEMS. With or Without Cats.
#CA201034N/C, CA201034W/C, CA2010278N/C, CA201078W/C, CA20102N/C, CA20102W/C

(4)

The ONLY driveshaft loop for the 2010 & Newer Camaro that requires NO DRILLING for installation! This bolt-on driveshaft safety loop is designed exclusively for the 2010-2013 Camaro SS equipped with either the six-speed or automatic transmission. #MDL3100

(4)

Used primarily for drag racing to provide positive locking action to the front wheels of race cars, reducing the chance of ''Rolling the Lights'' and producing more effective burn outs for heating up the tires. #5671518

(4)

.660" Lift Dual Spring Kit for LS engines using stock rocker arms.  Includes dual polished springs, matching titanium retainers, locators for stock guides, locks and seals. #PR7350312, PR7375312, PR7400312

(4)

We've combined two great products to save you money.  This winning combination pairs a Stainless Power 1 7/8" 304L stainless steel header with a Cold Air Inductions brand intake system.  The result are gains you can feel! #SP-CAI

(4)